2014-03-26  Mikolaj Izdebski  <zurgunt@gmail.com>

	Release version 2.5

	Fix performance bug in sequential compressor code
	* src/compress.c (do_collect_seq): Release collect semaphore before
	compressing block.  This improves performance a lot.

	Fix block ordering during compression
	* src/compress.c: Replace order deque with next position pointer
	stored in work block.  This way block order doesn't have to be defined
	sequentially.

2014-03-09  Mikolaj Izdebski  <zurgunt@gmail.com>

	Release version 2.4

	Update copyright notice in usage help

	Add release notes for version 2.4

	Document --small

	Document --sequential

	Add ---sequential CLI switch

	Don't remove build-aux/.gitignore during cleanup

2014-02-16  Mikolaj Izdebski  <zurgunt@gmail.com>

	Avoid scanning in sequential mode

2014-02-09  Mikolaj Izdebski  <zurgunt@gmail.com>

	Implement sequential collector

	Introduce order queue to compressor

	Implement restartable collector
	Now collector can potentially be stopped and restarted, allowing input
	blocks to be much smaller than compression block.  This feature used
	to be implemented in older versions of yambi.

	Reorder code in package_merge()

2014-02-08  Mikolaj Izdebski  <zurgunt@gmail.com>

	Cache current leaf weight at current depth in curr_weight[]

	Reduce branching in Package-Merge
	Add sentinel at the beginning of leaf_weight[] allows skipping bounds
	check, which reduces branches in a tight loop.

	Use memcpy() instead of bcopy()
	memcpy() can be faster for non-overlapping memory regions.  Also using
	constant length should be faster as optimizing compilers are expected
	to fully inline and unroll the whole memcpy() call.

2014-02-02  Mikolaj Izdebski  <zurgunt@gmail.com>

	Wrap lines which exceed 80 characters

	Rewrite cost computation code

	Code length counts don't need to be global

	Optimize assign_codes() and add tracing code

	Rename confusing variable lookup to code

	Make variables names in prefix encoder more human-readable

	Integrate Package-Merge with encoder

	Port new Package-Merge implementation from Java

	Compute cost when assigning prefix code

	Remove old implementation of Package-Merge

	Add .gitignore files

2014-01-27  Mikolaj Izdebski  <zurgunt@gmail.com>

	Update copyright notices

	Fix parser bug (overrun2)
	* src/parse.c (parse): Backport parser bugfix from lbzip2-java
	commit 4424921.

	Rewrite Package-Merge
	* src/encode.c (package_merge): Rewrite from scratch basing on
	Java implementation in lbzip2-java.

2014-01-18  Mikolaj Izdebski  <zurgunt@gmail.com>

	Add reproducer for parser bug

2013-12-10  Mikolaj Izdebski  <zurgunt@gmail.com>

	Document code in process.h

	Document block header parsing functions

	Remove dead code
	* src/parse.c (parse): Remove code that is executed
	  under condition that is asserted to be false.

	Explain existence of two different block parsing algorithms

	Avoid integer overflow with some 32-bit versions of Perl
	build-aux/make-crctab.pl: Avoid using arthmetic operators
	in favor of bit shift and immediate constants.

2013-10-27  Mikolaj Izdebski  <zurgunt@gmail.com>

	Fix another typo in tests/codelen20.c

	Fix a typo in tests/codelen20.c

	Add test case for bug #12 (rhbz#1017957)

	Properly initialize base code sentinel in make_tree()
	* src/decode.c (make_tree): make sure that base code sentinel
	(base[21]) is always set to plus infinity.  Fixes #12.

2013-10-13  Mikolaj Izdebski  <zurgunt@gmail.com>

	Update automake to 1.14
	* configure.ac: Bump automake version to 1.14.
	* tests/Makefile.am: Update to use new test driver API.
	* build-aux/autogen.sh: Remove build-aux/compile during cleanup.

2013-09-22  Mikolaj Izdebski  <zurgunt@gmail.com>

	Release version 2.3

	Complete ChangeLog

	Add Serhii Khilinich to THANKS

	Add website link to --version report

	Add website link to manual page

	Add website link to README

2013-07-21  Mikolaj Izdebski  <zurgunt@gmail.com>

	Fix assertion
	* src/encode.c (package_merge): Fix assertion about remaining number
	of non-singleton trees uppon Package Merge completion.

	Small comment improvements

2013-06-30  Mikolaj Izdebski  <zurgunt@gmail.com>

	Fix typos in prefix decoder code

2013-06-29  Mikolaj Izdebski  <zurgunt@gmail.com>

	Remove unused retriever FSM state
	* src/decode.c: Remove S_TRAILER enum.

2013-06-26  Mikolaj Izdebski  <zurgunt@gmail.com>

	Optimize Huffman algorithm
	* src/encode.c (build_tree): Rewrite loop body to minimize number of
	  comparisons and branches.

	Extract transmission cost computation as a separate function
	* src/encode.c (transmission_cost): New function.

2013-06-23  Mikolaj Izdebski  <zurgunt@gmail.com>

	Fix a typo in ALGORITHM

	Avoid compiler warnings in Package Merge mode
	* src/encode.c (make_code_lengths): Define V only when it's used.

	Add prefix coder sanity check
	* src/encode.c (make_code_lengths): Verify if Kraft's inequality is
	  satisfied.

	Reimplement Package Merge algorithm
	* src/encode.c (package_merge): Rewrite from scratch.

2013-06-22  Mikolaj Izdebski  <zurgunt@gmail.com>

	During cleanup remove all files genared by autotools
	build-aux/autogen.sh: Remove test-driver during cleanup.

2013-03-30  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix incorrect usage of foreach() macro
	src/signals.c (pending): Call foreach() macro with second argument
	as array, not pointer to array.

2013-03-28  Mikołaj Izdebski  <zurgunt@gmail.com>

	Improve comments in decode.c

2013-03-27  Mikołaj Izdebski  <zurgunt@gmail.com>

	Don't hardcode MAX_CODE_LENGTH
	* src/deocde.c (make_tree): Use constant MAX_CODE_LENGTH instead of
	hardcoding its value.

2013-03-02  Mikolaj Izdebski  <zurgunt@gmail.com>

	Add release note for Debian bug 700680

	Fix Debian bug 700680
	src/main.c (input_init): Allow input files not to be regular files when
	outputting to stdout or to the bit bucket.

2012-10-28  Mikolaj Izdebski  <zurgunt@gmail.com>

	Document copying with -cdf

	Copy files only with --stdout
	process.c (work): Allow copying files only when output fd is stdout.

	Add NEWS entry for v2.3

2012-10-21  Mikolaj Izdebski  <zurgunt@gmail.com>

	Assert that the first group is always coded by the first tree

	Fix a deadlock and enable file copying with -d -f
	src/process.c (copy_on_input_avail): Decrement out_slots semaphore.
	(copy_on_write_complete): Increment out_slots semaphore.
	(copy_terminate): Rename from never; raise SIGUSR2 if terminal
	condition is met.

2012-10-20  Mikolaj Izdebski  <zurgunt@gmail.com>

	Avoid shadowing auto variable

	Fix assertion failure, closes #8
	src/encode.c (generate_initial_trees): Rewrite from scratch.

2012-09-14  Mikolaj Izdebski  <zurgunt@gmail.com>

	Minor comment improvements and whitespace changes

2012-09-11  Mikolaj Izdebski  <zurgunt@gmail.com>

	Fix dead initialization bug

2012-08-06  Mikolaj Izdebski  <zurgunt@gmail.com>

	Ignore --small
	src/main.c (main): Reset small to zero.

	Improve initial tree generation
	* src/encode.c (generate_initial_trees): During initial set
	  paritioning round set cardinalities to the nearest instead of
	  rounding up. This decreases standard deviation of the size of trees
	  and thus improves compression.

	Add THANKS

	Document bugs fixed

	Explicitly license auxiliary programs under GPLv3+
	* tests/minbzcat.c: Relicense under GPLv3+.
	* tests/timeout.c: Add explicit license terms.

	Rebase to the newest version of yambi
	* ALGORITHM: Fix a typo.
	* Makefile.am: Remove yambi subdirectory.
	* build-aux/autogen.sh: Implement new directory structure layout.
	* build-aux/make-crctab.pl: Likewise.
	* build-aux/style-check.pl: Likewise.
	* configure.ac: Lower autoconf requirement. Optimize runtime by adding
	  gl_ASSERT_NO_GNULIB_TESTS and gl_ASSERT_NO_GNULIB_POSIXCHECK. Add
	  new compiler warnings. Implement new option "--enable-tracing".
	  Implement new directory structure layout.
	* src/Makefile.am: Import from newer version of yambi.
	* src/common.h: Likewise.
	* src/compress.c: Likewise.
	* src/decode.c: Likewise.
	* src/decode.h: Likewise.
	* src/divbwt.c: Likewise.
	* src/encode.c: Likewise.
	* src/encode.h: Likewise.
	* src/expand.c: Likewise.
	* src/main.c: Likewise.
	* src/main.h: Likewise.
	* src/parse.c: Likewise.
	* src/process.c: Likewise.
	* src/process.h: Likewise.
	* src/signals.c: Likewise.
	* src/signals.h: Likewise.
	* tests/Makefile.am: Likewise.
	* tests/cve2.bz2: Likewise.
	* src/lbunzip2.c: Remove file.
	* src/lbunzip2.h: Likewise.
	* src/lbzip2.c: Likewise.
	* src/lbzip2.h: Likewise.
	* src/pqueue.c: Likewise.
	* src/pqueue.h: Likewise.
	* yambi/Makefile.am: Likewise.
	* yambi/collect.c: Likewise.
	* yambi/decode.c: Likewise.
	* yambi/decode.h: Likewise.
	* yambi/divsufsort.c: Likewise.
	* yambi/emit.c: Likewise.
	* yambi/encode.c: Likewise.
	* yambi/encode.h: Likewise.
	* yambi/prefix.c: Likewise.
	* yambi/private.h: Likewise.
	* yambi/retrieve.c: Likewise.
	* yambi/transmit.c: Likewise.
	* yambi/yambi.h: Likewise.

2012-06-23  Mikolaj Izdebski  <zurgunt@gmail.com>

	Update ChangeLog

	Bump version to 2.2

	Simplify AUTHORS file

	Add workaround for Debian bug #673378
	* yambi/retrieve.c (YBdec_retrieve): Return YB_UNDERFLOW if in_avail is 0.
	This Works around dDebian bug #673378.

	Revert "Implement double-ended queue."
	* src/deque.c: Delete file.
	* src/deque.h: Likewise.

2012-02-22  Mikołaj Izdebski  <zurgunt@gmail.com>

	Implement double-ended queue.
	* src/deque.c: New file.
	* src/deque.h: New file.
	* src/Makefile.am: Add deque.[ch].

	Make pqueue_pop() return the popped element
	* src/pqueue.c (pqueue_pop): Return popped element.
	* src/pqueue.h (pqueue_pop): Change function prototype.

	Don't print EPIPE and EFBIG fatal errors
	* src/main.c (DEF): Skip printing fatal error messages if error number
	is EPIPE or EFGIG.

	Cleanup yambi code
	* yambi/divsufsort.h: Delete header file.
	* yambi/Makefile.am: Remove reference to divsufsort.h.
	* yambi/divsufsort.c: Include encode.h instead of divsufsort.h.
	Change cyclic_divbwt() function name to YBpriv_cyclic_divbwt().
	* yambi/encode.h (YBpriv_block_sort, YBpriv_sais): Remove prototypes
	of previously removed functions.
	* yambi/encode.c (YBenc_work): Replace reference to cyclic_divbwt()
	with YBpriv_cyclic_divbwt().
	* yambi/private.h (SLong): Remove unused type definition.

2012-02-21  Mikołaj Izdebski  <zurgunt@gmail.com>

	Implement new error handling

	Fix a bug in tandem repeat sort code
	* yambi/divsufsort.c (trsort): Fix a bug introduced in 336008f
	by altering the main trsort loop invariant. Adding a pre-condition
	of `-n < *SA' seems to fix the issue.

2012-02-16  Mikołaj Izdebski  <zurgunt@gmail.com>

	Remove obsolete shallow factor
	* yambi/collect.c, yambi/encode.h: Get rid of shallow_factor.
	* yambi/yambi.h: Remove YB_DEFAULT_SHALLOW #definition.
	* src/lbzip2.c (work_compr): Remove YB_DEFAULT_SHALLOW

2012-02-02  Mikołaj Izdebski  <zurgunt@gmail.com>

	Update copyright dates

	Disable load0 test

	Add version 2.2 entry in NEWS

	Update references in ALGORITHM

	Deprecate `--exponential'
	* build-aux/pretty-usage.pl, man/lbzip2.1: Update `--exponential' info.
	* src/main.c, src/lbzip2.c, src/lbzip2.h: Drop support for exponential.

2012-01-09  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix undefined behavior in divsufsort
	* yambi/divsufsort.c (trsort): Add bounds checks before moving pointer
	beyond allocated space.

	Extend bugfix from ca8e703c
	* yambi/divsufsort.c: Apply patch provided by Yuta Mori.

	Fix a bug with sorting periodic strings
	yambi/divsufsort.c (tr_introsort): Add depth condition.

	Integrate divsufsort with yambi
	* yambi/collect.c, yambi/encode.h: Let mtfv[] and SA[] share space
	and block[] be a separate array.
	* yambi/encode.c: Use divsufsort instead of old blocksort code.

	Adjust divsufsort to yambi
	* yambi/divsufsort.c: Remove include guardians. Define sauchar_t,
	saint_t and saidx_t in terms of <inttypes.h>. Remove __inline.
	(MAX): Remove unused macro. (construct_SA): Remove unused function.
	(construct_BWT): Remove unused parameter `m'. (cyclic_divsufsort):
	Remove unused function. (cyclic_divbwt): Write resulting BWT
	transform to SA[] instead of separate output array. Replace malloc()
	with xmalloc(). Optimize code for case with no B* suffixes.
	* yambi/divsufsort.h: Remove C++ code. Remove unused prototype.

	Import code from cyclic-divsufsort-lite
	yambi/divsufsort.c, yambi/divsufsort.h: New files.

	Remove existing block-sorting code
	yambi/blocksort.c, yambi/sais.c: Remove files.

2012-01-07  Mikołaj Izdebski  <zurgunt@gmail.com>

	Integrate new block-sorting code with yambi
	yambi/collect.c: Share block[] and mtfv[] space for better cache
	perfoemance and lower memory usage.
	yambi/encode.c: Read BWT characters from bwt[] and not block[].
	yambi/encode.h: Add YBpriv_sais() prototype. Add bwt field to YBenc_s.
	yambi/private.h: Implement peekb() and pokeb() macros.
	build-aux/style-check.pl, yambi/Makefile.am: Mention yambi/sais.c.

	Refactor block-sorting code
	yambi/blocksort.c: Refactor quicksort and bucket sort code for better
	readability. Remove BPR code. Remove code copyrighted by Juliad Seward
	and the corresponding license block.

	Import cyclic-sais
	yambi/sais.c: Import from cyclic-sais 1.0 by Yuta Mori.

2011-12-25  Mikolaj Izdebski  <zurgunt@gmail.com>

	Remove unused constants
	* src/lbunzip2.c: Remove magic_mask and magic_hdr definitions.

	Remove unused constant definition
	* yambi/yambi.h: Remove YB_CANCELED macro definition.

2011-12-23  Mikolaj Izdebski  <zurgunt@gmail.com>

	Import new test case -- load0
	* tests/load0.bz2: Initial version.
	* tests/Makefile.am: Add load0.bz2 as a new test.

	Limit time and memory usage during tests
	* tests/timeout.c: Initial version.
	* tests/Makefile.am: Build timeout from timeout.c.
	* tests/Tester: Try limiting virtual memory usage with `ulimit -v'.
	Run decompresion subprocesses with alarm set to 1 minute.

	Make minbzcat be more compatible with bzip2
	* tests/minbzcat.c (main): Count block size digit as part of stream
	header. Fixes #3.

	Add check for fatal signals in tester
	* tests/Tester: Add checks for subprocess exit codes >= 128. All tests
	in which either lbzip2 or minbzcat exited because of unhandled signals
	are treated as failed.

2011-12-04  Mikołaj Izdebski  <zurgunt@gmail.com>

	Add two more test cases.
	* tests/incomp: Initial version.
	* tests/incomp-1.bz2, tests/incomp-2.bz2: Generate using tests/incomp.
	* tests/README: Update to mention incomp-[12].bz2.
	* tests/Makefile.am: Add the new test cases.

	Fix bug #5
	* src/lbunzip2.c (work_decompr): Assign w2w_blk->bs100k
	to w2m_blk->bs100k only if YB_OK == ybret. Fixes: #5. This bug caused
	files with input blocks larger than 1 MiB to be rejected by lbunzip2.
	* tests/ch255.bz2: Add as a regression test for bug #5.
	* tests/Makefile.am: Re-enable crc1.bz2, add ch255.bz2.

	Workaround bug #5
	* src/lbunzip2.c (mux): Disable stream CRC check. Fixes #5.
	* tests/Makefile.am: Exclude crc1.bz2 from test cases.

2011-11-24  Mikołaj Izdebski  <zurgunt@gmail.com>

	Get rid of AM_MAINTAINER_MODE
	* configure.ac: Remove AM_MAINTAINER_MODE, which was included by
	accident.

2011-11-23  Mikołaj Izdebski  <zurgunt@gmail.com>

	Bump version to 2.1

	Fix a use-after-free vulnerability in lbunzip2
	* src/lbunzip2.c (work_retrieve.c): Move access to s2w_blk before
	work_release() call. Fixes #4.

2011-11-11  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix build error on OpenBSD 5.0
	* src/main.c (opts_setup): Use _SC_THREAD_THREADS_MAX conditionally.

2011-11-05  Mikołaj Izdebski  <zurgunt@gmail.com>

	Update autogen.sh to remove gitlog-to-changelog
	* build-aux/autogen.sh: Remove gitlog-to-changelog with -r option.

2011-11-02  Mikołaj Izdebski  <zurgunt@gmail.com>

	Update and improve documentation
	* README: Add Laszlo Ersek's copyright notice.
	* yambi/blocksort.c: Add example Manber-Myers algorithm implementation.

2011-10-31  Mikołaj Izdebski  <zurgunt@gmail.com>

	Include ChangeLog.old in tarball
	* Makefile.am: Add ChangeLog.old to EXTRA_DIST.

	Create changelogs
	* build-aux/autogen.sh: Add gitlog-to-changelog Gnulib module.
	* ChangeLog.old: Import from v0.23.
	* ChangeLog: Generate with build-aux/gitlog-to-changelog.

2011-10-30  Mikołaj Izdebski  <zurgunt@gmail.com>

	Minor documentation cleanup

	Add BOOTSTRAP

	Add filenames and short desc to license blocks

	Run automated spelling check

	Make tests/Tester more portable

2011-10-29  Mikołaj Izdebski  <zurgunt@gmail.com>

	Make install and uninstall targets work

	Add list of subdirs to README

	Extend AUTHORS

	Import ALGORITHM

	Add a minimal README

	Cleanup manpage

2011-10-28  Mikołaj Izdebski  <zurgunt@gmail.com>

	Add scantab.h to noinst_HEADERS

2011-10-27  Mikołaj Izdebski  <zurgunt@gmail.com>

	Minor code cleanups to avoid gcc warnings
	 * Add extra braces in generated scantab.h
	 * Add __attribute__((printf, ...)) to log_fatal()
	 * Add extra switch case in lbunzip2 parser

	Make file sizes unsigned integers (uintmax_t)

	Remove SETX from lbunzip2

2011-10-23  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix Tester to support VPATH builds

	Display progress info during decompression

	Improve error messages in lbunzip2 muxer

	Move progress info printing code to main.c

	Fix a bug that prevented VPATH build from working

	Reimplement lbunzip2 magic pattern scanner as DFA

2011-10-22  Mikołaj Izdebski  <zurgunt@gmail.com>

	Cleanup and improve lbunzip2 header parser
	Improvements implemented:
	 * block overruns are detected (fixes `overrun.bz2')
	 * stream CRCs are computed and checked (fixes `crc1.bz2')
	 * initial stream headers are parsed (fixes `trash.bz2' and `void.bz2')
	 * files with gaps between streams are rejected (fixes `gap.bz2')
	 * minor speed enchancements

	NEWS were updated to reflect recent improvements.

2011-10-22  Mikołaj Izdebski  <zurgunt@gmail.com>

	Implement initial header parser for lbunzip2
	Partly fixes `gap.bz2' bug. For now the parser isn't detecting
	parse errors and parsing results (CRC and bs100k) are unused.

	Reorder scanner code in lbunzip2.c

	Pad lbunzip2 input blocks to multiple of 32 bits

2011-10-20  Mikołaj Izdebski  <zurgunt@gmail.com>

	Add more files to EXTRA_DIST
	Fix a typo in style-check.pl naming.

2011-10-18  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix a minor bug in autogen.sh

2011-10-17  Mikołaj Izdebski  <zurgunt@gmail.com>

	Reimplement BPR algorithm

2011-10-13  Mikołaj Izdebski  <zurgunt@gmail.com>

	Improve comments in blocksort.c, prefix.c and retrieve.c

2011-10-08  Laszlo Ersek  <lacos@caesar.elte.hu>

	trivial typo fix in man page

2011-10-07  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix -Wno-unknown-warning-option

	Narrow usage text width to 79 characters

	Add missing _Noreturn attributes

	Add -Wno-unknown-warning-option for clang

	Remove Trace() macros

	Turn off warnings about unreachable code

	Link lbunzip2 and lbzcat manpages to lbzip2

	Use uintmax_t for block identifiers

	Import a newer version of minbzcat

2011-10-04  Mikołaj Izdebski  <zurgunt@gmail.com>

	Unset LBZIP2 et al. in tests/Tester

	Import and extend lbzip2 manpage

2011-09-27  Mikołaj Izdebski  <zurgunt@gmail.com>

	Print version and usage info on stdout, not stderr
	Add build-aux/pretty-usage.pl to help maintaining usage message.

2011-09-23  Mikołaj Izdebski  <zurgunt@gmail.com>

	autogen.sh: set IFS to space-tab-newline

	Add make-crctab.pl

	Style fixups based on style-check.pl report

	Add build-aux/style-check.pl

2011-09-22  Mikołaj Izdebski  <zurgunt@gmail.com>

	Move autogen.sh to build-aux/

	Fix a bug with displaying an error message

2011-09-20  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix a typo in tests/cve.c
	A typo in tests/cve.c caused tests/cve.bz2 to be invalid. Update both.

2011-09-19  Mikołaj Izdebski  <zurgunt@gmail.com>

	minbzcat: add checks for Kraft's inequality

	Fix a typo in yambi/Makefile.am

	Write initial NEWS

	Import basic test cases

	Add noinst_HEADERS in src and yambi subdirs

2011-09-14  Mikołaj Izdebski  <zurgunt@gmail.com>

	Replace AC_SYS_LARGEFILE with largefile Gnulib module
	Downgrade to autoconf 2.67 to ease development on Debian stable.
	Import realloc-gnu module. Remove redundant checks from configure.ac.

2011-09-12  Mikołaj Izdebski  <zurgunt@gmail.com>

	Rename the project back to lbzip2

2011-09-11  Mikołaj Izdebski  <zurgunt@gmail.com>

	In lbunzip2 initialise `scan' with all ones, not all zeros
	This decreases probability of finding false-positives when looking
	for the magic bit pattern.

	Remove split_chkstart()
	Upcoming stream parser obsoletes split_chkstart().

	Prioritize decompressing earlier blocks
	Decompress retrieved blocks basing on their position within the
	stream, not FCFS.

	Replace lacos_rbtree with pqueue

	Fix a bug related to htonl() usage

	Drop fupport for LBZIP2_TRACE_ALLOC
	Replace home-made xalloc() with xmalloc() provided by Gnulib.

	Disable compiler warnings about aggregate return

2011-09-10  Mikołaj Izdebski  <zurgunt@gmail.com>

	Reduce memory usage during decompression

2011-09-09  Mikołaj Izdebski  <zurgunt@gmail.com>

	Remove emacs file variables

	Add missing copyright notices

	Implement smarter scanner in lbunzip2
	Redesign yambi's retrieve pass.  Remove IBS structure and related
	functions from yambi API.  Perform yambi's retrieve pass directly
	during lbunzip2's scan pass and not during decompress pass.

2011-09-07  Mikołaj Izdebski  <zurgunt@gmail.com>

	Read 32 bits at time in lbunzip2

	Add #include <sys/types.h> for size_t
	Include sys/types.h instead of stddef.h for size_t.

	Guard config.h inclusions
	Surround #include <config.h> with #ifdef HAVE_CONFIG_H.

	Make use of SIZE_MAX
	Replace (size_t)-1 with SIZE_MAX.

	Improve configure.ac

	Added -r option to autogen.sh

	Delete corr-perf.sh, malloc_trace.pl and test.sh

	Optimize lbunzip2 state machine

2011-08-28  Mikołaj Izdebski  <zurgunt@gmail.com>

	Restore atime and mtime with nanosec accuracy

	Convert gettimeofday() calls to gettime()

	Don't display file name with progress info

2011-08-26  Mikołaj Izdebski  <zurgunt@gmail.com>

	Add a configure switch to enable warnings

2011-08-25  Mikołaj Izdebski  <zurgunt@gmail.com>

	Rename to bzimp2
	Update externally visible names to bzimp2. Remove man page.
	Split usage and version printing options.

	Fix GCC compatibility bugs

2011-08-23  Mikołaj Izdebski  <zurgunt@gmail.com>

	Remove .cvsignore

	Add more checks to configure.ac

2011-08-20  Mikołaj Izdebski  <zurgunt@gmail.com>

	Include <config.h> in all source files

	Replace utime() with fdutimens()

	Create autogen.sh

	Migrate to GNU build system
	Move lbzip2 source files to "src" subdirectory. Remove Makefiles.
	Create initial "configure.ac" and "Makefile.am" files.

2011-08-19  Mikołaj Izdebski  <zurgunt@gmail.com>

	Display progress info during compression

	Display compression ratio in verbose mode

2011-08-16  Mikołaj Izdebski  <zurgunt@gmail.com>

	Remove redundant includes

2011-08-15  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix a compatibility bug

2011-08-14  Mikołaj Izdebski  <zurgunt@gmail.com>

	Add support for decompressing randomized blocks

2011-08-13  Mikołaj Izdebski  <zurgunt@gmail.com>

	Minor comments and code cleanup
	Add more coments on prefix code decoding. Remove a potential
	incompatibility with platforms that don't use U2 encoding for signed
	integers. Remove unused auto variables. Replace loops zeroing bigger
	arrays with calls to bzero().

2011-08-12  Mikołaj Izdebski  <zurgunt@gmail.com>

	Minor formatting cleanup

	Eliminate SIZES() macro
	Get rid of SIZES() to simplify the code.

	Introduce xread() and xwrite()
	Generalize existing I/O code and create xread() and xwrite() to ease
	maintaintenance.  Pack "fd", "sep" and "fmt" into struct filespec
	to emphasise their close relationship and simplify the code.

2011-08-11  Mikołaj Izdebski  <zurgunt@gmail.com>

	Clean up the code
	Minor code cleanups:
	 * move nested function declaration to global scope,
	 * convert K&R function definitions to ANSI,
	 * move common macros to header file,
	 * remove unused auto variables,
	 * make pointer casts not strip the const qualifier,
	 * change some variable types between signed and unsigned,
	 * add missing copyright notices,
	 * correct intentation in lbzip2.c,
	 * remove white spaces from end of lines,
	 * replace tabs by spaces (except from Makefiles).

	Improve compression performance
	The main block sorting algorithm is reworked to behave better
	in average case while remaining fast enough in the worst case.

2011-08-09  Mikołaj Izdebski  <zurgunt@gmail.com>

	Make decompression error messages more datailed
	Implement Yberr_detail() -- a function returning a textual
	representation of decompression error codes. Make use of
	Yberr_detail() in lbunzip2.c.

2011-07-30  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix a buffer overflow in yambi decompression code
	Fix a security vulnerability.  A specially crafted compressed file
	could potentially cause a buffer overflow in YBibs_retrieve.

	Some minor optimizations and cleanups:
	 * utilize htonl() and nothl() for (hopefully) faster memory access
	 * remove outdated code that wasn't used anyways
	 * change default values of some yambi tuning parameters
	 * reorder some struct members; move bigger arrays to the end
	 * remove some automatic variables to reduce register pollution

2011-07-30  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix a bug in sorting algorithm implementation
	Fix a bug in main sorting algorithm implementation.

	Fix two different bugs
	Fix a bug in decompression code that was caused by a typo.
	Fix a compatibility issue in yambi/private.h.

2011-07-29  Mikołaj Izdebski  <zurgunt@gmail.com>

	Fix a bug in lbzip2 compresion code
	This commit fixes a bug that was introduced in the previous commit.

	Minor enchancements:
	 * implement --exponential command line switch with the same semantics
	   as bzip2's equivalent
	 * reduce average-case memory consumption in compression mode
	   by about 3.5 MB per worker

	Minor cleanups:
	 * remove unused code
	 * remove whitespaces from end of source code lines
	 * replace some tabs with spaces
	 * correct line indentation
	 * remove bogus __builtin_prefetch'es
	 * remove GPLv2 as now the code in under GPLv3+ only
	 * remove README as it doesn't reflect current code
	 * remove ChangeLog as it was obsoleted by migration to git

2011-07-28  Mikołaj Izdebski  <zurgunt@gmail.com>

	Import a newer version of yambi
	Import a newer version of yambi, which contains compression code.
	Remove libbz2 compatibility layer from yambi.  Modify lbzip2 and lbunzip2
	so that they use yambi's API directly, without the compatibility layer.
	Update Makefiles.  Remove dependency on libbz2.

	Remove lbunzip2_single
	Remove lbunzip2_single, as upcoming sequential decompressor is
	obsoleting it.

2011-07-26  Laszlo Ersek  <lacos@caesar.elte.hu>

	base decompression on newly imported yambi
	Import yambi. Adapt Makefiles and decompression modules.

	import lbzip2-0.23
[--snip--]
