LOGINCTL(1)

NAME
loginctl - Control the elogind login manager

SYNOPSIS

loginctl [OPTIONS...] {COMMAND} [NAME...]

/lib/elogind/system-shutdown

/lib/elogind/system-sleep

DESCRIPTION

loginctl may be used to introspect and control the state of the elogind(8) login manager

COMMANDS

The following commands are understood:

  Session Commands

list-sessions
    List current sessions.

session-status [ID...]
    Show terse runtime status information about one or more sessions, followed by the most recent log data from the journal. Takes one or more session identifiers as parameters. If no session identifiers are passed, the status of the caller's session is shown. This function is intended to generate human-readable output. If you are looking for computer-parsable output, use show-session instead.

show-session [ID...]
    Show properties of one or more sessions or the manager itself. If no argument is specified, properties of the manager will be shown. If a session ID is specified, properties of the session are shown. By default, empty properties are suppressed. Use --all to show those too. To select specific properties to show, use --property=. This command is intended to be used whenever computer-parsable output is required. Use session-status if you are looking for formatted human-readable output.

activate [ID]
    Activate a session. This brings a session into the foreground if another session is currently in the foreground on the respective seat. Takes a session identifier as argument. If no argument is specified, the session of the caller is put into foreground.

lock-session [ID...], unlock-session [ID...]
    Activates/deactivates the screen lock on one or more sessions, if the session supports it. Takes one or more session identifiers as arguments. If no argument is specified, the session of the caller is locked/unlocked.

lock-sessions, unlock-sessions
    Activates/deactivates the screen lock on all current sessions supporting it.

terminate-session ID...
    Terminates a session. This kills all processes of the session and deallocates all resources attached to the session.

kill-session ID...
    Send a signal to one or more processes of the session. Use --kill-who= to select which process to kill. Use --signal= to select the signal to send.

  User Commands

list-users
    List currently logged in users.

user-status [USER...]
    Show terse runtime status information about one or more logged in users, followed by the most recent log data from the journal. Takes one or more user names or numeric user IDs as parameters. If no parameters are passed, the status is shown for the user of the session of the caller. This function is intended to generate human-readable output. If you are looking for computer-parsable output, use show-user instead.

show-user [USER...]
    Show properties of one or more users or the manager itself. If no argument is specified, properties of the manager will be shown. If a user is specified, properties of the user are shown. By default, empty properties are suppressed. Use --all to show those too. To select specific properties to show, use --property=. This command is intended to be used whenever computer-parsable output is required. Use user-status if you are looking for formatted human-readable output.

terminate-user USER...
    Terminates all sessions of a user. This kills all processes of all sessions of the user and deallocates all runtime resources attached to the user.

kill-user USER...
    Send a signal to all processes of a user. Use --signal= to select the signal to send.

  Seat Commands

list-seats
    List currently available seats on the local system.

seat-status [NAME...]
    Show terse runtime status information about one or more seats. Takes one or more seat names as parameters. If no seat names are passed the status of the caller's session's seat is shown. This function is intended to generate human-readable output. If you are looking for computer-parsable output, use show-seat instead.

show-seat [NAME...]
    Show properties of one or more seats or the manager itself. If no argument is specified, properties of the manager will be shown. If a seat is specified, properties of the seat are shown. By default, empty properties are suppressed. Use --all to show those too. To select specific properties to show, use --property=. This command is intended to be used whenever computer-parsable output is required. Use seat-status if you are looking for formatted human-readable output.

attach NAME DEVICE...
    Persistently attach one or more devices to a seat. The devices should be specified via device paths in the /sys file system. To create a new seat, attach at least one graphics card to a previously unused seat name. Seat names may consist only of a–z, A–Z, 0–9, "-" and "_" and must be prefixed with "seat". To drop assignment of a device to a specific seat, just reassign it to a different seat, or use flush-devices.

flush-devices
    Removes all device assignments previously created with attach. After this call, only automatically generated seats will remain, and all seat hardware is assigned to them.

terminate-seat NAME...
    Terminates all sessions on a seat. This kills all processes of all sessions on the seat and deallocates all runtime resources attached to them.

  System Commands

reload
    Reload the elogind configuration. While the daemon is being reloaded, all sockets elogind listens on behalf of user configuration will stay accessible.

poweroff
    Shut down and power-off the system. This is mostly equivalent to shutdown -h. This command is asynchronous; it will return after the power-off operation is enqueued, without waiting for it to complete.

reboot [--firmware-setup]
    Shut down and reboot the system. This is mostly equivalent to shutdown -r. This command is asynchronous; it will return after the reboot operation is enqueued, without waiting for it to complete.

    If the optional argument --firmware-setup is given, indicate to the system's firmware to reboot into the firmware setup interface. Note that this functionality is not available on all systems.

suspend
    Suspend the system. This will tell all processes registered via dbus to prepare for suspension. This command is asynchronous, and will return after the suspend operation is successfully enqueued. It will not wait for the suspend/resume cycle to complete.

hibernate
    Hibernate the system. This will tell all processes registered via dbus to prepare for hibernation. This command is asynchronous, and will return after the hibernation operation is successfully enqueued. It will not wait for the hibernate/thaw cycle to complete.

hybrid-sleep
    Hibernate and suspend the system. This will tell all processes registered via dbus to prepare for hybrid-sleep. This command is asynchronous, and will return after the hybrid sleep operation is successfully enqueued. It will not wait for the sleep/wake-up cycle to complete.

suspend-then-hibernate
    Suspend the system and hibernate it after the delay specified in logind.conf. This will tell all processes registered via dbus to prepare for suspend-then-hibernate. This command is asynchronous, and will return after the hybrid sleep operation is successfully enqueued. It will not wait for the sleep/wake-up or hibernate/thaw cycle to complete.

  Hook directories

[/usr]/lib[64]/elogind/system-sleep/, /etc/elogind/system-sleep/
    Immediately before entering system suspend and/or hibernation elogind will run all executables in [/usr]/lib[64]/elogind/system-sleep/ and /etc/elogind/system-sleep/ and pass two arguments to them. The first argument will be "pre", the second either "suspend", "hibernate", "hybrid-sleep", or "suspend-then-hibernate", depending on the chosen action. Immediately after leaving system suspend and/or hibernation the same executables are run, but the first argument is now "post". All executables in this directory are executed sequentially, and execution of the action is not continued until all executables have finished.

[/usr]/lib[64]/elogind/system-shutdown/, /etc/elogind/system-shutdown/
    Immediately before rebooting or powering the system off, elogind will run all executables in [/usr]/lib[64]/elogind/system-shutdown/ and /etc/elogind/system-shutdown/ and pass one argument to them. The argument will either be "poweroff" or "reboot", depending on the chosen action.

AllowPowerOffInterrupts, AllowSuspendInterrupts
    Whether the executables in these directories run successfully or not is of no concern to elogind. If you want the scripts to cause the action to be cancelled if one fails, you can set "AllowPowerOffInterrupts" and/or "AllowSuspendInterrupts" to "yes" in /etc/elogind/logind.conf. For this to work the executables in question must print an error message to "STDOUT" that begins with either of these keywords: "CANCELLED", "CRITICAL", "ERROR" or "FAILED". If you want any of these words in a message without causing the action to be cancelled, just re-arrange the sentence in question so that the keyword is not the first word.

BroadcastPowerOffInterrupts, BroadcastSuspendInterrupts
    By default an interrupt of a power off or a suspend is broadcasted. If you do not whish these broadcasts to happen, change "BroadcastPowerOffInterrupts" and/or "BroadcastSuspendInterrupts" to "no" in /etc/elogind/logind.conf.

Note that scripts or binaries dropped in any of the hook directories are intended for local use only and should be considered hacks. If applications want to react to these system commands, they should rather use the Inhibitor interface[1].

OPTIONS

The following options are understood:

--no-ask-password
    Do not query the user for authentication for privileged operations.

-p, --property=
    When showing session/user/seat properties, limit display to certain properties as specified as argument. If not specified, all set properties are shown. The argument should be a property name, such as "Sessions". If specified more than once, all properties with the specified names are shown.

--value
    When showing session/user/seat properties, only print the value, and skip the property name and "=".

-a, --all
    When showing session/user/seat properties, show all properties regardless of whether they are set or not.

-l, --full
    Do not ellipsize process tree entries.

--kill-who=
    When used with kill-session, choose which processes to kill. Must be one of leader, or all to select whether to kill only the leader process of the session or all processes of the session. If omitted, defaults to all.

-s, --signal=
    When used with kill-session or kill-user, choose which signal to send to selected processes. Must be one of the well known signal specifiers, such as SIGTERM, SIGINT or SIGSTOP. If omitted, defaults to SIGTERM.

-o, --output=
    When used with user-status and session-status, controls the formatting of the journal entries that are shown. For the available choices, see journalctl(1). Defaults to "short".

-
    Cancel a pending shutdown or reboot.

-i, --ignore-inhibitors
    When system shutdown or a sleep state is requested, ignore inhibitor locks. Applications can establish inhibitor locks to avoid that certain important operations (such as CD burning or suchlike) are interrupted by system shutdown or a sleep state. Any user may take these locks and privileged users may override these locks. If any locks are taken, shutdown and sleep state requests will normally fail (unless privileged) and a list of active locks is printed. However, if --ignore-inhibitors is specified, the established locks are ignored and not shown, and the operation attempted anyway, possibly requiring additional privileges.

-H, --host=
    Execute the operation remotely. Specify a hostname, or a username and hostname separated by "@", to connect to. The hostname may optionally be suffixed by a port ssh is listening on, separated by ":", and then a container name, separated by "/", which connects directly to a specific container on the specified host. This will use SSH to talk to the remote machine manager instance. Container names may be enumerated with machinectl -H HOST. Put IPv6 addresses in brackets.

-M, --machine=
    Execute operation on a local container. Specify a container name to connect to.

--no-pager
    Do not pipe output into a pager.

--no-legend
    Do not print the legend, i.e. column headers and the footer with hints.

-h, --help
    Print a short help text and exit.

--version
    Print a short version string and exit.

EXIT STATUS

On success, 0 is returned, a non-zero failure code otherwise.

EXAMPLES

Example 1. Querying user status

    $ loginctl user-status
    sed (1004)
               Since: Wed 2020-01-29 20:32:00 CET; 3 days ago
               State: active
            Sessions: 3 *2
              Linger: no
                Unit: user-1004.slice

There are two sessions, 2 and 3. The session 2 is a graphical session, marked with a star. Uptime, state, lingering state und the user unit are shown. The user unit is an artificial construct, elogind does not really support systemd units and slices.

ENVIRONMENT

$SYSTEMD_PAGER
    Pager to use when --no-pager is not given; overrides $PAGER. If neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager implementations are tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered no pager is invoked. Setting this environment variable to an empty string or the value "cat" is equivalent to passing --no-pager.

$SYSTEMD_LESS
    Override the options passed to less (by default "FRSXMK").

    Users might want to change two options in particular:

    K
        This option instructs the pager to exit immediately when Ctrl+C is pressed. To allow less to handle Ctrl+C itself to switch back to the pager command prompt, unset this option.

        If the value of $SYSTEMD_LESS does not include "K", and the pager that is invoked is less, Ctrl+C will be ignored by the executable, and needs to be handled by the pager.

    X
        This option instructs the pager to not send termcap initialization and deinitialization strings to the terminal. It is set by default to allow command output to remain visible in the terminal even after the pager exits. Nevertheless, this prevents some pager functionality from working, in particular paged output cannot be scrolled with the mouse.

    See less(1) for more discussion.

$SYSTEMD_LESSCHARSET
    Override the charset passed to less (by default "utf-8", if the invoking terminal is determined to be UTF-8 compatible).

$SYSTEMD_PAGERSECURE
    Takes a boolean argument. When true, the "secure" mode of the pager is enabled; if false, disabled. If $SYSTEMD_PAGERSECURE is not set at all, secure mode is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3). In secure mode, LESSSECURE=1 will be set when invoking the pager, and the pager shall disable commands that open or create new files or start new subprocesses. When $SYSTEMD_PAGERSECURE is not set at all, pagers which are not known to implement secure mode will not be used. (Currently only less(1) implements secure mode.)

    Note: when commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), care must be taken to ensure that unintended interactive features are not enabled. "Secure" mode for the pager may be enabled automatically as describe above. Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment allows the user to invoke arbitrary commands. Note that if the $SYSTEMD_PAGER or $PAGER variables are to be honoured, $SYSTEMD_PAGERSECURE must be set too. It might be reasonable to completly disable the pager using --no-pager instead.

$SYSTEMD_COLORS
    The value must be a boolean. Controls whether colorized output should be generated. This can be specified to override the decision that elogind makes based on $TERM and what the console is connected to.

$SYSTEMD_URLIFY
    The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that elogind makes based on $TERM and other conditions.

SEE ALSO

elogind(8), logind.conf(5)

NOTES

1.  Inhibitor interface
    https://www.freedesktop.org/wiki/Software/systemd/inhibit