cmake version 2.8.8
------------------------------------------------------------------------------
Introduction

cmake-properties - Reference of CMake properties.

------------------------------------------------------------------------------
Properties

  CMake Properties - Properties supported by CMake, the Cross-Platform Makefile Generator.

This is the documentation for the properties supported by CMake.  Properties
can have different scopes.  They can either be assigned to a source file, a
directory, a target or globally to CMake.  By modifying the values of
properties the behaviour of the build system can be customized.

------------------------------------------------------------------------------
Properties of Global Scope

  ALLOW_DUPLICATE_CUSTOM_TARGETS
       Allow duplicate custom targets to be created.

       Normally CMake requires that all targets built in a project have
       globally unique logical names (see policy CMP0002).  This is necessary
       to generate meaningful project file names in Xcode and VS IDE
       generators.  It also allows the target names to be referenced
       unambiguously.

       Makefile generators are capable of supporting duplicate custom target
       names.  For projects that care only about Makefile generators and do
       not wish to support Xcode or VS IDE generators, one may set this
       property to true to allow duplicate custom targets.  The property
       allows multiple add_custom_target command calls in different
       directories to specify the same target name.  However, setting this
       property will cause non-Makefile generators to produce an error and
       refuse to generate the project.

  DEBUG_CONFIGURATIONS
       Specify which configurations are for debugging.

       The value must be a semi-colon separated list of configuration names.
       Currently this property is used only by the target_link_libraries
       command (see its documentation for details).  Additional uses may be
       defined in the future.

       This property must be set at the top level of the project and before
       the first target_link_libraries command invocation.  If any entry in
       the list does not match a valid configuration for the project the
       behavior is undefined.

  DISABLED_FEATURES
       List of features which are disabled during the CMake run.

       List of features which are disabled during the CMake run.  By default
       it contains the names of all packages which were not found.  This is
       determined using the <NAME>_FOUND variables.  Packages which are
       searched QUIET are not listed.  A project can add its own features to
       this list.  This property is used by the macros in
       FeatureSummary.cmake.

  ENABLED_FEATURES
       List of features which are enabled during the CMake run.

       List of features which are enabled during the CMake run.  By default
       it contains the names of all packages which were found.  This is
       determined using the <NAME>_FOUND variables.  Packages which are
       searched QUIET are not listed.  A project can add its own features to
       this list.  This property is used by the macros in
       FeatureSummary.cmake.

  ENABLED_LANGUAGES
       Read-only property that contains the list of currently enabled
       languages

       Set to list of currently enabled languages.

  FIND_LIBRARY_USE_LIB64_PATHS
       Whether FIND_LIBRARY should automatically search lib64 directories.

       FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the
       FIND_LIBRARY command should automatically search the lib64 variant of
       directories called lib in the search path when building 64-bit
       binaries.

  FIND_LIBRARY_USE_OPENBSD_VERSIONING
       Whether FIND_LIBRARY should find OpenBSD-style shared libraries.

       This property is a boolean specifying whether the FIND_LIBRARY command
       should find shared libraries with OpenBSD-style versioned extension:
       ".so.<major>.<minor>".  The property is set to true on OpenBSD and
       false on other platforms.

  GLOBAL_DEPENDS_DEBUG_MODE
       Enable global target dependency graph debug mode.

       CMake automatically analyzes the global inter-target dependency graph
       at the beginning of native build system generation.  This property
       causes it to display details of its analysis to stderr.

  GLOBAL_DEPENDS_NO_CYCLES
       Disallow global target dependency graph cycles.

       CMake automatically analyzes the global inter-target dependency graph
       at the beginning of native build system generation.  It reports an
       error if the dependency graph contains a cycle that does not consist
       of all STATIC library targets.  This property tells CMake to disallow
       all cycles completely, even among static libraries.

  IN_TRY_COMPILE
       Read-only property that is true during a try-compile configuration.

       True when building a project inside a TRY_COMPILE or TRY_RUN command.

  PACKAGES_FOUND
       List of packages which were found during the CMake run.

       List of packages which were found during the CMake run.  Whether a
       package has been found is determined using the <NAME>_FOUND variables.

  PACKAGES_NOT_FOUND
       List of packages which were not found during the CMake run.

       List of packages which were not found during the CMake run.  Whether a
       package has been found is determined using the <NAME>_FOUND variables.

  PREDEFINED_TARGETS_FOLDER
       Name of FOLDER for targets that are added automatically by CMake.

       If not set, CMake uses "CMakePredefinedTargets" as a default value for
       this property.  Targets such as INSTALL, PACKAGE and RUN_TESTS will be
       organized into this FOLDER.  See also the documentation for the FOLDER
       target property.

  REPORT_UNDEFINED_PROPERTIES
       If set, report any undefined properties to this file.

       If this property is set to a filename then when CMake runs it will
       report any properties or variables that were accessed but not defined
       into the filename specified in this property.

  RULE_LAUNCH_COMPILE
       Specify a launcher for compile rules.

       Makefile generators prefix compiler commands with the given launcher
       command line.  This is intended to allow launchers to intercept build
       problems with high granularity.  Non-Makefile generators currently
       ignore this property.

  RULE_LAUNCH_CUSTOM
       Specify a launcher for custom rules.

       Makefile generators prefix custom commands with the given launcher
       command line.  This is intended to allow launchers to intercept build
       problems with high granularity.  Non-Makefile generators currently
       ignore this property.

  RULE_LAUNCH_LINK
       Specify a launcher for link rules.

       Makefile generators prefix link and archive commands with the given
       launcher command line.  This is intended to allow launchers to
       intercept build problems with high granularity.  Non-Makefile
       generators currently ignore this property.

  RULE_MESSAGES
       Specify whether to report a message for each make rule.

       This property specifies whether Makefile generators should add a
       progress message describing what each build rule does.  If the
       property is not set the default is ON.  Set the property to OFF to
       disable granular messages and report only as each target completes.
       This is intended to allow scripted builds to avoid the build time cost
       of detailed reports.  If a CMAKE_RULE_MESSAGES cache entry exists its
       value initializes the value of this property.  Non-Makefile generators
       currently ignore this property.

  TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
       Set if shared libraries may be named like archives.

       On AIX shared libraries may be named "lib<name>.a".  This property is
       set to true on such platforms.

  TARGET_SUPPORTS_SHARED_LIBS
       Does the target platform support shared libraries.

       TARGET_SUPPORTS_SHARED_LIBS is a boolean specifying whether the target
       platform supports shared libraries.  Basically all current general
       general purpose OS do so, the exception are usually embedded systems
       with no or special OSs.

  USE_FOLDERS
       Use the FOLDER target property to organize targets into folders.

       If not set, CMake treats this property as OFF by default.  CMake
       generators that are capable of organizing into a hierarchy of folders
       use the values of the FOLDER target property to name those folders.
       See also the documentation for the FOLDER target property.

  __CMAKE_DELETE_CACHE_CHANGE_VARS_
       Internal property

       Used to detect compiler changes, Do not set.

------------------------------------------------------------------------------
Properties on Directories

  ADDITIONAL_MAKE_CLEAN_FILES
       Additional files to clean during the make clean stage.

       A list of files that will be cleaned as a part of the "make clean"
       stage.

  CACHE_VARIABLES
       List of cache variables available in the current directory.

       This read-only property specifies the list of CMake cache variables
       currently defined.  It is intended for debugging purposes.

  CLEAN_NO_CUSTOM
       Should the output of custom commands be left.

       If this is true then the outputs of custom commands for this directory
       will not be removed during the "make clean" stage.

  COMPILE_DEFINITIONS
       Preprocessor definitions for compiling a directory's sources.

       The COMPILE_DEFINITIONS property may be set to a semicolon-separated
       list of preprocessor definitions using the syntax VAR or VAR=value.
       Function-style definitions are not supported.  CMake will
       automatically escape the value correctly for the native build system
       (note that CMake language syntax may require escapes to specify some
       values).  This property may be set on a per-configuration basis using
       the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
       name (ex.  "COMPILE_DEFINITIONS_DEBUG").  This property will be
       initialized in each directory by its value in the directory's parent.

       CMake will automatically drop some definitions that are not supported
       by the native build tool.  The VS6 IDE does not support definition
       values with spaces (but NMake does).

       Disclaimer: Most native build tools have poor support for escaping
       certain values.  CMake has work-arounds for many cases but some values
       may just not be possible to pass correctly.  If a value does not seem
       to be escaped correctly, do not attempt to work-around the problem by
       adding escape sequences to the value.  Your work-around may break in a
       future version of CMake that has improved escape support.  Instead
       consider defining the macro in a (configured) header file.  Then
       report the limitation.  Known limitations include:

         #          - broken almost everywhere
         ;          - broken in VS IDE and Borland Makefiles
         ,          - broken in VS IDE
         %          - broken in some cases in NMake
         & |        - broken in some cases on MinGW
         ^ < > \"   - broken in most Make tools on Windows

       CMake does not reject these values outright because they do work in
       some cases.  Use with caution.

  COMPILE_DEFINITIONS_<CONFIG>
       Per-configuration preprocessor definitions in a directory.

       This is the configuration-specific version of COMPILE_DEFINITIONS.
       This property will be initialized in each directory by its value in
       the directory's parent.


  DEFINITIONS
       For CMake 2.4 compatibility only.  Use COMPILE_DEFINITIONS instead.

       This read-only property specifies the list of flags given so far to
       the add_definitions command.  It is intended for debugging purposes.
       Use the COMPILE_DEFINITIONS instead.

  EXCLUDE_FROM_ALL
       Exclude the directory from the all target of its parent.

       A property on a directory that indicates if its targets are excluded
       from the default build target.  If it is not, then with a Makefile for
       example typing make will cause the targets to be built.  The same
       concept applies to the default build of other generators.

  IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
       Specify #include line transforms for dependencies in a directory.

       This property specifies rules to transform macro-like #include lines
       during implicit dependency scanning of C and C++ source files.  The
       list of rules must be semicolon-separated with each entry of the form
       "A_MACRO(%)=value-with-%" (the % must be literal).  During dependency
       scanning occurrences of A_MACRO(...) on #include lines will be
       replaced by the value given with the macro argument substituted for
       '%'.  For example, the entry

         MYDIR(%)=<mydir/%>

       will convert lines of the form

         #include MYDIR(myheader.h)

       to

         #include <mydir/myheader.h>

       allowing the dependency to be followed.

       This property applies to sources in all targets within a directory.
       The property value is initialized in each directory by its value in
       the directory's parent.

  INCLUDE_DIRECTORIES
       List of preprocessor include file search directories.

       This property specifies the list of directories given so far to the
       include_directories command.  This property exists on directories and
       targets.  In addition to accepting values from the include_directories
       command, values may be set directly on any directory or any target
       using the set_property command.  A target gets its initial value for
       this property from the value of the directory property.  A directory
       gets its initial value from its parent directory if it has one.  Both
       directory and target property values are adjusted by calls to the
       include_directories command.

       The target property values are used by the generators to set the
       include paths for the compiler.  See also the include_directories
       command.

  INCLUDE_REGULAR_EXPRESSION
       Include file scanning regular expression.

       This read-only property specifies the regular expression used during
       dependency scanning to match include files that should be followed.
       See the include_regular_expression command.

  INTERPROCEDURAL_OPTIMIZATION
       Enable interprocedural optimization for targets in a directory.

       If set to true, enables interprocedural optimizations if they are
       known to be supported by the compiler.

  INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
       Per-configuration interprocedural optimization for a directory.

       This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
       If set, this property overrides the generic property for the named
       configuration.

  LINK_DIRECTORIES
       List of linker search directories.

       This read-only property specifies the list of directories given so far
       to the link_directories command.  It is intended for debugging
       purposes.

  LISTFILE_STACK
       The current stack of listfiles being processed.

       This property is mainly useful when trying to debug errors in your
       CMake scripts.  It returns a list of what list files are currently
       being processed, in order.  So if one listfile does an INCLUDE command
       then that is effectively pushing the included listfile onto the stack.

  MACROS
       List of macro commands available in the current directory.

       This read-only property specifies the list of CMake macros currently
       defined.  It is intended for debugging purposes.  See the macro
       command.

  PARENT_DIRECTORY
       Source directory that added current subdirectory.

       This read-only property specifies the source directory that added the
       current source directory as a subdirectory of the build.  In the
       top-level directory the value is the empty-string.

  RULE_LAUNCH_COMPILE
       Specify a launcher for compile rules.

       See the global property of the same name for details.  This overrides
       the global property for a directory.

  RULE_LAUNCH_CUSTOM
       Specify a launcher for custom rules.

       See the global property of the same name for details.  This overrides
       the global property for a directory.

  RULE_LAUNCH_LINK
       Specify a launcher for link rules.

       See the global property of the same name for details.  This overrides
       the global property for a directory.

  TEST_INCLUDE_FILE
       A cmake file that will be included when ctest is run.

       If you specify TEST_INCLUDE_FILE, that file will be included and
       processed when ctest is run on the directory.

  VARIABLES
       List of variables defined in the current directory.

       This read-only property specifies the list of CMake variables
       currently defined.  It is intended for debugging purposes.

------------------------------------------------------------------------------
Properties on Targets

  <CONFIG>_OUTPUT_NAME
       Old per-configuration target file base name.

       This is a configuration-specific version of OUTPUT_NAME.  Use
       OUTPUT_NAME_<CONFIG> instead.

  <CONFIG>_POSTFIX
       Postfix to append to the target file name for configuration <CONFIG>.

       When building with configuration <CONFIG> the value of this property
       is appended to the target file name built on disk.  For non-executable
       targets, this property is initialized by the value of the variable
       CMAKE_<CONFIG>_POSTFIX if it is set when a target is created.  This
       property is ignored on the Mac for Frameworks and App Bundles.

  ARCHIVE_OUTPUT_DIRECTORY
       Output directory in which to build ARCHIVE target files.

       This property specifies the directory into which archive target files
       should be built.  Multi-configuration generators (VS, Xcode) append a
       per-configuration subdirectory to the specified directory.  There are
       three kinds of target files that may be built: archive, library, and
       runtime.  Executables are always treated as runtime targets.  Static
       libraries are always treated as archive targets.  Module libraries are
       always treated as library targets.  For non-DLL platforms shared
       libraries are treated as library targets.  For DLL platforms the DLL
       part of a shared library is treated as a runtime target and the
       corresponding import library is treated as an archive target.  All
       Windows-based systems including Cygwin are DLL platforms.  This
       property is initialized by the value of the variable
       CMAKE_ARCHIVE_OUTPUT_DIRECTORY if it is set when a target is created.

  ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
       Per-configuration output directory for ARCHIVE target files.

       This is a per-configuration version of ARCHIVE_OUTPUT_DIRECTORY, but
       multi-configuration generators (VS, Xcode) do NOT append a
       per-configuration subdirectory to the specified directory.  This
       property is initialized by the value of the variable
       CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
       created.

  ARCHIVE_OUTPUT_NAME
       Output name for ARCHIVE target files.

       This property specifies the base name for archive target files.  It
       overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.  There are
       three kinds of target files that may be built: archive, library, and
       runtime.  Executables are always treated as runtime targets.  Static
       libraries are always treated as archive targets.  Module libraries are
       always treated as library targets.  For non-DLL platforms shared
       libraries are treated as library targets.  For DLL platforms the DLL
       part of a shared library is treated as a runtime target and the
       corresponding import library is treated as an archive target.  All
       Windows-based systems including Cygwin are DLL platforms.

  ARCHIVE_OUTPUT_NAME_<CONFIG>
       Per-configuration output name for ARCHIVE target files.

       This is the configuration-specific version of ARCHIVE_OUTPUT_NAME.

  AUTOMOC
       Should the target be processed with automoc (for Qt projects).

       AUTOMOC is a boolean specifying whether CMake will handle the Qt moc
       preprocessor automatically, i.e.  without having to use the
       QT4_WRAP_CPP() macro.  Currently Qt4 is supported.  When this property
       is set to TRUE, CMake will scan the source files at build time and
       invoke moc accordingly.  If an #include statement like #include
       "moc_foo.cpp" is found, the Q_OBJECT class declaration is expected in
       the header, and moc is run on the header file.  If an #include
       statement like #include "foo.moc" is found, then a Q_OBJECT is
       expected in the current source file and moc is run on the file itself.
       Additionally, all header files are parsed for Q_OBJECT macros, and if
       found, moc is also executed on those files.  The resulting moc files,
       which are not included as shown above in any of the source files are
       included in a generated <targetname>_automoc.cpp file, which is
       compiled as part of the target.This property is initialized by the
       value of the variable CMAKE_AUTOMOC if it is set when a target is
       created.

       Additional command line options for moc can be set via the
       AUTOMOC_MOC_OPTIONS property.

       By setting the CMAKE_AUTOMOC_RELAXED_MODE variable to TRUE the rules
       for searching the files which will be processed by moc can be relaxed.
       See the documentation for this variable for more details.

  AUTOMOC_MOC_OPTIONS
       Additional options for moc when using automoc (see the AUTOMOC
       property)

       This property is only used if the AUTOMOC property is set to TRUE for
       this target.  In this case, it holds additional command line options
       which will be used when moc is executed during the build, i.e.  it is
       equivalent to the optional OPTIONS argument of the qt4_wrap_cpp()
       macro.

       By default it is empty.

  BUILD_WITH_INSTALL_RPATH
       Should build tree targets have install tree rpaths.

       BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the
       target in the build tree with the INSTALL_RPATH.  This takes
       precedence over SKIP_BUILD_RPATH and avoids the need for relinking
       before installation.  This property is initialized by the value of the
       variable CMAKE_BUILD_WITH_INSTALL_RPATH if it is set when a target is
       created.

  BUNDLE
       This target is a CFBundle on the Mac.

       If a module library target has this property set to true it will be
       built as a CFBundle when built on the mac.  It will have the directory
       structure required for a CFBundle and will be suitable to be used for
       creating Browser Plugins or other application resources.

  BUNDLE_EXTENSION
       The file extension used to name a BUNDLE target on the Mac.

       The default value is "bundle" - you can also use "plugin" or whatever
       file extension is required by the host app for your bundle.

  COMPILE_DEFINITIONS
       Preprocessor definitions for compiling a target's sources.

       The COMPILE_DEFINITIONS property may be set to a semicolon-separated
       list of preprocessor definitions using the syntax VAR or VAR=value.
       Function-style definitions are not supported.  CMake will
       automatically escape the value correctly for the native build system
       (note that CMake language syntax may require escapes to specify some
       values).  This property may be set on a per-configuration basis using
       the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
       name (ex.  "COMPILE_DEFINITIONS_DEBUG").

       CMake will automatically drop some definitions that are not supported
       by the native build tool.  The VS6 IDE does not support definition
       values with spaces (but NMake does).

       Disclaimer: Most native build tools have poor support for escaping
       certain values.  CMake has work-arounds for many cases but some values
       may just not be possible to pass correctly.  If a value does not seem
       to be escaped correctly, do not attempt to work-around the problem by
       adding escape sequences to the value.  Your work-around may break in a
       future version of CMake that has improved escape support.  Instead
       consider defining the macro in a (configured) header file.  Then
       report the limitation.  Known limitations include:

         #          - broken almost everywhere
         ;          - broken in VS IDE and Borland Makefiles
         ,          - broken in VS IDE
         %          - broken in some cases in NMake
         & |        - broken in some cases on MinGW
         ^ < > \"   - broken in most Make tools on Windows

       CMake does not reject these values outright because they do work in
       some cases.  Use with caution.

  COMPILE_DEFINITIONS_<CONFIG>
       Per-configuration preprocessor definitions on a target.

       This is the configuration-specific version of COMPILE_DEFINITIONS.

  COMPILE_FLAGS
       Additional flags to use when compiling this target's sources.

       The COMPILE_FLAGS property sets additional compiler flags used to
       build sources within the target.  Use COMPILE_DEFINITIONS to pass
       additional preprocessor definitions.

  DEBUG_POSTFIX
       See target property <CONFIG>_POSTFIX.

       This property is a special case of the more-general <CONFIG>_POSTFIX
       property for the DEBUG configuration.

  DEFINE_SYMBOL
       Define a symbol when compiling this target's sources.

       DEFINE_SYMBOL sets the name of the preprocessor symbol defined when
       compiling sources in a shared library.  If not set here then it is set
       to target_EXPORTS by default (with some substitutions if the target is
       not a valid C identifier).  This is useful for headers to know whether
       they are being included from inside their library our outside to
       properly setup dllexport/dllimport decorations.

  ENABLE_EXPORTS
       Specify whether an executable exports symbols for loadable modules.

       Normally an executable does not export any symbols because it is the
       final program.  It is possible for an executable to export symbols to
       be used by loadable modules.  When this property is set to true CMake
       will allow other targets to "link" to the executable with the
       TARGET_LINK_LIBRARIES command.  On all platforms a target-level
       dependency on the executable is created for targets that link to it.
       For DLL platforms an import library will be created for the exported
       symbols and then used for linking.  All Windows-based systems
       including Cygwin are DLL platforms.  For non-DLL platforms that
       require all symbols to be resolved at link time, such as Mac OS X, the
       module will "link" to the executable using a flag like
       "-bundle_loader".  For other non-DLL platforms the link rule is simply
       ignored since the dynamic loader will automatically bind symbols when
       the module is loaded.

  EXCLUDE_FROM_ALL
       Exclude the target from the all target.

       A property on a target that indicates if the target is excluded from
       the default build target.  If it is not, then with a Makefile for
       example typing make will cause this target to be built.  The same
       concept applies to the default build of other generators.  Installing
       a target with EXCLUDE_FROM_ALL set to true has undefined behavior.

  EchoString
       A message to be displayed when the target is built.

       A message to display on some generators (such as makefiles) when the
       target is built.

  FOLDER
       Set the folder name.  Use to organize targets in an IDE.

       Targets with no FOLDER property will appear as top level entities in
       IDEs like Visual Studio.  Targets with the same FOLDER property value
       will appear next to each other in a folder of that name.  To nest
       folders, use FOLDER values such as 'GUI/Dialogs' with '/' characters
       separating folder levels.

  FRAMEWORK
       This target is a framework on the Mac.

       If a shared library target has this property set to true it will be
       built as a framework when built on the mac.  It will have the
       directory structure required for a framework and will be suitable to
       be used with the -framework option

  Fortran_FORMAT
       Set to FIXED or FREE to indicate the Fortran source layout.

       This property tells CMake whether the Fortran source files in a target
       use fixed-format or free-format.  CMake will pass the corresponding
       format flag to the compiler.  Use the source-specific Fortran_FORMAT
       property to change the format of a specific source file.  If the
       variable CMAKE_Fortran_FORMAT is set when a target is created its
       value is used to initialize this property.

  Fortran_MODULE_DIRECTORY
       Specify output directory for Fortran modules provided by the target.

       If the target contains Fortran source files that provide modules and
       the compiler supports a module output directory this specifies the
       directory in which the modules will be placed.  When this property is
       not set the modules will be placed in the build directory
       corresponding to the target's source directory.  If the variable
       CMAKE_Fortran_MODULE_DIRECTORY is set when a target is created its
       value is used to initialize this property.

       Note that some compilers will automatically search the module output
       directory for modules USEd during compilation but others will not.  If
       your sources USE modules their location must be specified by
       INCLUDE_DIRECTORIES regardless of this property.

  GENERATOR_FILE_NAME
       Generator's file for this target.

       An internal property used by some generators to record the name of
       project or dsp file associated with this target.

  GNUtoMS
       Convert GNU import library (.dll.a) to MS format (.lib).

       When linking a shared library or executable that exports symbols using
       GNU tools on Windows (MinGW/MSYS) with Visual Studio installed convert
       the import library (.dll.a) from GNU to MS format (.lib).  Both import
       libraries will be installed by install(TARGETS) and exported by
       install(EXPORT) and export() to be linked by applications with either
       GNU- or MS-compatible tools.

       If the variable CMAKE_GNUtoMS is set when a target is created its
       value is used to initialize this property.  The variable must be set
       prior to the first command that enables a language such as project()
       or enable_language().  CMake provides the variable as an option to the
       user automatically when configuring on Windows with GNU tools.

  HAS_CXX
       Link the target using the C++ linker tool (obsolete).

       This is equivalent to setting the LINKER_LANGUAGE property to CXX.
       See that property's documentation for details.

  IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
       Specify #include line transforms for dependencies in a target.

       This property specifies rules to transform macro-like #include lines
       during implicit dependency scanning of C and C++ source files.  The
       list of rules must be semicolon-separated with each entry of the form
       "A_MACRO(%)=value-with-%" (the % must be literal).  During dependency
       scanning occurrences of A_MACRO(...) on #include lines will be
       replaced by the value given with the macro argument substituted for
       '%'.  For example, the entry

         MYDIR(%)=<mydir/%>

       will convert lines of the form

         #include MYDIR(myheader.h)

       to

         #include <mydir/myheader.h>

       allowing the dependency to be followed.

       This property applies to sources in the target on which it is set.

  IMPORTED
       Read-only indication of whether a target is IMPORTED.

       The boolean value of this property is true for targets created with
       the IMPORTED option to add_executable or add_library.  It is false for
       targets built within the project.

  IMPORTED_CONFIGURATIONS
       Configurations provided for an IMPORTED target.

       Set this to the list of configuration names available for an IMPORTED
       target.  The names correspond to configurations defined in the project
       from which the target is imported.  If the importing project uses a
       different set of configurations the names may be mapped using the
       MAP_IMPORTED_CONFIG_<CONFIG> property.  Ignored for non-imported
       targets.

  IMPORTED_IMPLIB
       Full path to the import library for an IMPORTED target.

       Set this to the location of the ".lib" part of a windows DLL.  Ignored
       for non-imported targets.

  IMPORTED_IMPLIB_<CONFIG>
       <CONFIG>-specific version of IMPORTED_IMPLIB property.

       Configuration names correspond to those provided by the project from
       which the target is imported.

  IMPORTED_LINK_DEPENDENT_LIBRARIES
       Dependent shared libraries of an imported shared library.

       Shared libraries may be linked to other shared libraries as part of
       their implementation.  On some platforms the linker searches for the
       dependent libraries of shared libraries they are including in the
       link.  Set this property to the list of dependent shared libraries of
       an imported library.  The list should be disjoint from the list of
       interface libraries in the IMPORTED_LINK_INTERFACE_LIBRARIES property.
       On platforms requiring dependent shared libraries to be found at link
       time CMake uses this list to add appropriate files or paths to the
       link command line.  Ignored for non-imported targets.

  IMPORTED_LINK_DEPENDENT_LIBRARIES_<CONFIG>
       <CONFIG>-specific version of IMPORTED_LINK_DEPENDENT_LIBRARIES.

       Configuration names correspond to those provided by the project from
       which the target is imported.  If set, this property completely
       overrides the generic property for the named configuration.

  IMPORTED_LINK_INTERFACE_LANGUAGES
       Languages compiled into an IMPORTED static library.

       Set this to the list of languages of source files compiled to produce
       a STATIC IMPORTED library (such as "C" or "CXX").  CMake accounts for
       these languages when computing how to link a target to the imported
       library.  For example, when a C executable links to an imported C++
       static library CMake chooses the C++ linker to satisfy language
       runtime dependencies of the static library.

       This property is ignored for targets that are not STATIC libraries.
       This property is ignored for non-imported targets.

  IMPORTED_LINK_INTERFACE_LANGUAGES_<CONFIG>
       <CONFIG>-specific version of IMPORTED_LINK_INTERFACE_LANGUAGES.

       Configuration names correspond to those provided by the project from
       which the target is imported.  If set, this property completely
       overrides the generic property for the named configuration.

  IMPORTED_LINK_INTERFACE_LIBRARIES
       Transitive link interface of an IMPORTED target.

       Set this to the list of libraries whose interface is included when an
       IMPORTED library target is linked to another target.  The libraries
       will be included on the link line for the target.  Unlike the
       LINK_INTERFACE_LIBRARIES property, this property applies to all
       imported target types, including STATIC libraries.  This property is
       ignored for non-imported targets.

  IMPORTED_LINK_INTERFACE_LIBRARIES_<CONFIG>
       <CONFIG>-specific version of IMPORTED_LINK_INTERFACE_LIBRARIES.

       Configuration names correspond to those provided by the project from
       which the target is imported.  If set, this property completely
       overrides the generic property for the named configuration.

  IMPORTED_LINK_INTERFACE_MULTIPLICITY
       Repetition count for cycles of IMPORTED static libraries.

       This is LINK_INTERFACE_MULTIPLICITY for IMPORTED targets.

  IMPORTED_LINK_INTERFACE_MULTIPLICITY_<CONFIG>
       <CONFIG>-specific version of IMPORTED_LINK_INTERFACE_MULTIPLICITY.

       If set, this property completely overrides the generic property for
       the named configuration.

  IMPORTED_LOCATION
       Full path to the main file on disk for an IMPORTED target.

       Set this to the location of an IMPORTED target file on disk.  For
       executables this is the location of the executable file.  For bundles
       on OS X this is the location of the executable file inside
       Contents/MacOS under the application bundle folder.  For static
       libraries and modules this is the location of the library or module.
       For shared libraries on non-DLL platforms this is the location of the
       shared library.  For frameworks on OS X this is the location of the
       library file symlink just inside the framework folder.  For DLLs this
       is the location of the ".dll" part of the library.  For UNKNOWN
       libraries this is the location of the file to be linked.  Ignored for
       non-imported targets.

       Projects may skip IMPORTED_LOCATION if the configuration-specific
       property IMPORTED_LOCATION_<CONFIG> is set.  To get the location of an
       imported target read one of the LOCATION or LOCATION_<CONFIG>
       properties.

  IMPORTED_LOCATION_<CONFIG>
       <CONFIG>-specific version of IMPORTED_LOCATION property.

       Configuration names correspond to those provided by the project from
       which the target is imported.

  IMPORTED_NO_SONAME
       Specifies that an IMPORTED shared library target has no "soname".

       Set this property to true for an imported shared library file that has
       no "soname" field.  CMake may adjust generated link commands for some
       platforms to prevent the linker from using the path to the library in
       place of its missing soname.  Ignored for non-imported targets.

  IMPORTED_NO_SONAME_<CONFIG>
       <CONFIG>-specific version of IMPORTED_NO_SONAME property.

       Configuration names correspond to those provided by the project from
       which the target is imported.

  IMPORTED_SONAME
       The "soname" of an IMPORTED target of shared library type.

       Set this to the "soname" embedded in an imported shared library.  This
       is meaningful only on platforms supporting the feature.  Ignored for
       non-imported targets.

  IMPORTED_SONAME_<CONFIG>
       <CONFIG>-specific version of IMPORTED_SONAME property.

       Configuration names correspond to those provided by the project from
       which the target is imported.

  IMPORT_PREFIX
       What comes before the import library name.

       Similar to the target property PREFIX, but used for import libraries
       (typically corresponding to a DLL) instead of regular libraries.  A
       target property that can be set to override the prefix (such as "lib")
       on an import library name.

  IMPORT_SUFFIX
       What comes after the import library name.

       Similar to the target property SUFFIX, but used for import libraries
       (typically corresponding to a DLL) instead of regular libraries.  A
       target property that can be set to override the suffix (such as
       ".lib") on an import library name.

  INCLUDE_DIRECTORIES
       List of preprocessor include file search directories.

       This property specifies the list of directories given so far to the
       include_directories command.  This property exists on directories and
       targets.  In addition to accepting values from the include_directories
       command, values may be set directly on any directory or any target
       using the set_property command.  A target gets its initial value for
       this property from the value of the directory property.  A directory
       gets its initial value from its parent directory if it has one.  Both
       directory and target property values are adjusted by calls to the
       include_directories command.

       The target property values are used by the generators to set the
       include paths for the compiler.  See also the include_directories
       command.

  INSTALL_NAME_DIR
       Mac OSX directory name for installed targets.

       INSTALL_NAME_DIR is a string specifying the directory portion of the
       "install_name" field of shared libraries on Mac OSX to use in the
       installed targets.

  INSTALL_RPATH
       The rpath to use for installed targets.

       A semicolon-separated list specifying the rpath to use in installed
       targets (for platforms that support it).  This property is initialized
       by the value of the variable CMAKE_INSTALL_RPATH if it is set when a
       target is created.

  INSTALL_RPATH_USE_LINK_PATH
       Add paths to linker search and installed rpath.

       INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true will
       append directories in the linker search path and outside the project
       to the INSTALL_RPATH.  This property is initialized by the value of
       the variable CMAKE_INSTALL_RPATH_USE_LINK_PATH if it is set when a
       target is created.

  INTERPROCEDURAL_OPTIMIZATION
       Enable interprocedural optimization for a target.

       If set to true, enables interprocedural optimizations if they are
       known to be supported by the compiler.

  INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
       Per-configuration interprocedural optimization for a target.

       This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
       If set, this property overrides the generic property for the named
       configuration.

  LABELS
       Specify a list of text labels associated with a target.

       Target label semantics are currently unspecified.

  LIBRARY_OUTPUT_DIRECTORY
       Output directory in which to build LIBRARY target files.

       This property specifies the directory into which library target files
       should be built.  Multi-configuration generators (VS, Xcode) append a
       per-configuration subdirectory to the specified directory.  There are
       three kinds of target files that may be built: archive, library, and
       runtime.  Executables are always treated as runtime targets.  Static
       libraries are always treated as archive targets.  Module libraries are
       always treated as library targets.  For non-DLL platforms shared
       libraries are treated as library targets.  For DLL platforms the DLL
       part of a shared library is treated as a runtime target and the
       corresponding import library is treated as an archive target.  All
       Windows-based systems including Cygwin are DLL platforms.  This
       property is initialized by the value of the variable
       CMAKE_LIBRARY_OUTPUT_DIRECTORY if it is set when a target is created.

  LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
       Per-configuration output directory for LIBRARY target files.

       This is a per-configuration version of LIBRARY_OUTPUT_DIRECTORY, but
       multi-configuration generators (VS, Xcode) do NOT append a
       per-configuration subdirectory to the specified directory.  This
       property is initialized by the value of the variable
       CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
       created.

  LIBRARY_OUTPUT_NAME
       Output name for LIBRARY target files.

       This property specifies the base name for library target files.  It
       overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.  There are
       three kinds of target files that may be built: archive, library, and
       runtime.  Executables are always treated as runtime targets.  Static
       libraries are always treated as archive targets.  Module libraries are
       always treated as library targets.  For non-DLL platforms shared
       libraries are treated as library targets.  For DLL platforms the DLL
       part of a shared library is treated as a runtime target and the
       corresponding import library is treated as an archive target.  All
       Windows-based systems including Cygwin are DLL platforms.

  LIBRARY_OUTPUT_NAME_<CONFIG>
       Per-configuration output name for LIBRARY target files.

       This is the configuration-specific version of LIBRARY_OUTPUT_NAME.

  LINKER_LANGUAGE
       Specifies language whose compiler will invoke the linker.

       For executables, shared libraries, and modules, this sets the language
       whose compiler is used to link the target (such as "C" or "CXX").  A
       typical value for an executable is the language of the source file
       providing the program entry point (main).  If not set, the language
       with the highest linker preference value is the default.  See
       documentation of CMAKE_<LANG>_LINKER_PREFERENCE variables.

  LINK_DEPENDS
       Additional files on which a target binary depends for linking.

       Specifies a semicolon-separated list of full-paths to files on which
       the link rule for this target depends.  The target binary will be
       linked if any of the named files is newer than it.

       This property is ignored by non-Makefile generators.  It is intended
       to specify dependencies on "linker scripts" for custom Makefile link
       rules.

  LINK_FLAGS
       Additional flags to use when linking this target.

       The LINK_FLAGS property can be used to add extra flags to the link
       step of a target.  LINK_FLAGS_<CONFIG> will add to the configuration
       <CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.

  LINK_FLAGS_<CONFIG>
       Per-configuration linker flags for a target.

       This is the configuration-specific version of LINK_FLAGS.

  LINK_INTERFACE_LIBRARIES
       List public interface libraries for a shared library or executable.

       By default linking to a shared library target transitively links to
       targets with which the library itself was linked.  For an executable
       with exports (see the ENABLE_EXPORTS property) no default transitive
       link dependencies are used.  This property replaces the default
       transitive link dependencies with an explicit list.  When the target
       is linked into another target the libraries listed (and recursively
       their link interface libraries) will be provided to the other target
       also.  If the list is empty then no transitive link dependencies will
       be incorporated when this target is linked into another target even if
       the default set is non-empty.  This property is initialized by the
       value of the variable CMAKE_LINK_INTERFACE_LIBRARIES if it is set when
       a target is created.  This property is ignored for STATIC libraries.

  LINK_INTERFACE_LIBRARIES_<CONFIG>
       Per-configuration list of public interface libraries for a target.

       This is the configuration-specific version of
       LINK_INTERFACE_LIBRARIES.  If set, this property completely overrides
       the generic property for the named configuration.

  LINK_INTERFACE_MULTIPLICITY
       Repetition count for STATIC libraries with cyclic dependencies.

       When linking to a STATIC library target with cyclic dependencies the
       linker may need to scan more than once through the archives in the
       strongly connected component of the dependency graph.  CMake by
       default constructs the link line so that the linker will scan through
       the component at least twice.  This property specifies the minimum
       number of scans if it is larger than the default.  CMake uses the
       largest value specified by any target in a component.

  LINK_INTERFACE_MULTIPLICITY_<CONFIG>
       Per-configuration repetition count for cycles of STATIC libraries.

       This is the configuration-specific version of
       LINK_INTERFACE_MULTIPLICITY.  If set, this property completely
       overrides the generic property for the named configuration.

  LINK_SEARCH_END_STATIC
       End a link line such that static system libraries are used.

       Some linkers support switches such as -Bstatic and -Bdynamic to
       determine whether to use static or shared libraries for -lXXX options.
       CMake uses these options to set the link type for libraries whose full
       paths are not known or (in some cases) are in implicit link
       directories for the platform.  By default CMake adds an option at the
       end of the library list (if necessary) to set the linker search type
       back to its starting type.  This property switches the final linker
       search type to -Bstatic regardless of how it started.  See also
       LINK_SEARCH_START_STATIC.

  LINK_SEARCH_START_STATIC
       Assume the linker looks for static libraries by default.

       Some linkers support switches such as -Bstatic and -Bdynamic to
       determine whether to use static or shared libraries for -lXXX options.
       CMake uses these options to set the link type for libraries whose full
       paths are not known or (in some cases) are in implicit link
       directories for the platform.  By default the linker search type is
       assumed to be -Bdynamic at the beginning of the library list.  This
       property switches the assumption to -Bstatic.  It is intended for use
       when linking an executable statically (e.g.  with the GNU -static
       option).  See also LINK_SEARCH_END_STATIC.

  LOCATION
       Read-only location of a target on disk.

       For an imported target, this read-only property returns the value of
       the LOCATION_<CONFIG> property for an unspecified configuration
       <CONFIG> provided by the target.

       For a non-imported target, this property is provided for compatibility
       with CMake 2.4 and below.  It was meant to get the location of an
       executable target's output file for use in add_custom_command.  The
       path may contain a build-system-specific portion that is replaced at
       build time with the configuration getting built (such as
       "$(ConfigurationName)" in VS).  In CMake 2.6 and above
       add_custom_command automatically recognizes a target name in its
       COMMAND and DEPENDS options and computes the target location.  In
       CMake 2.8.4 and above add_custom_command recognizes generator
       expressions to refer to target locations anywhere in the command.
       Therefore this property is not needed for creating custom commands.

       Do not set properties that affect the location of a target after
       reading this property.  These include properties whose names match
       "(RUNTIME|LIBRARY|ARCHIVE)_OUTPUT_(NAME|DIRECTORY)(_<CONFIG>)?" or
       "(IMPLIB_)?(PREFIX|SUFFIX)".  Failure to follow this rule is not
       diagnosed and leaves the location of the target undefined.

  LOCATION_<CONFIG>
       Read-only property providing a target location on disk.

       A read-only property that indicates where a target's main file is
       located on disk for the configuration <CONFIG>.  The property is
       defined only for library and executable targets.  An imported target
       may provide a set of configurations different from that of the
       importing project.  By default CMake looks for an exact-match but
       otherwise uses an arbitrary available configuration.  Use the
       MAP_IMPORTED_CONFIG_<CONFIG> property to map imported configurations
       explicitly.

       Do not set properties that affect the location of a target after
       reading this property.  These include properties whose names match
       "(RUNTIME|LIBRARY|ARCHIVE)_OUTPUT_(NAME|DIRECTORY)(_<CONFIG>)?" or
       "(IMPLIB_)?(PREFIX|SUFFIX)".  Failure to follow this rule is not
       diagnosed and leaves the location of the target undefined.

  MACOSX_BUNDLE
       Build an executable as an application bundle on Mac OS X.

       When this property is set to true the executable when built on Mac OS
       X will be created as an application bundle.  This makes it a GUI
       executable that can be launched from the Finder.  See the
       MACOSX_BUNDLE_INFO_PLIST target property for information about
       creation of the Info.plist file for the application bundle.  This
       property is initialized by the value of the variable
       CMAKE_MACOSX_BUNDLE if it is set when a target is created.

  MACOSX_BUNDLE_INFO_PLIST
       Specify a custom Info.plist template for a Mac OS X App Bundle.

       An executable target with MACOSX_BUNDLE enabled will be built as an
       application bundle on Mac OS X.  By default its Info.plist file is
       created by configuring a template called MacOSXBundleInfo.plist.in
       located in the CMAKE_MODULE_PATH.  This property specifies an
       alternative template file name which may be a full path.

       The following target properties may be set to specify content to be
       configured into the file:

         MACOSX_BUNDLE_INFO_STRING
         MACOSX_BUNDLE_ICON_FILE
         MACOSX_BUNDLE_GUI_IDENTIFIER
         MACOSX_BUNDLE_LONG_VERSION_STRING
         MACOSX_BUNDLE_BUNDLE_NAME
         MACOSX_BUNDLE_SHORT_VERSION_STRING
         MACOSX_BUNDLE_BUNDLE_VERSION
         MACOSX_BUNDLE_COPYRIGHT

       CMake variables of the same name may be set to affect all targets in a
       directory that do not have each specific property set.  If a custom
       Info.plist is specified by this property it may of course hard-code
       all the settings instead of using the target properties.

  MACOSX_FRAMEWORK_INFO_PLIST
       Specify a custom Info.plist template for a Mac OS X Framework.

       An library target with FRAMEWORK enabled will be built as a framework
       on Mac OS X.  By default its Info.plist file is created by configuring
       a template called MacOSXFrameworkInfo.plist.in located in the
       CMAKE_MODULE_PATH.  This property specifies an alternative template
       file name which may be a full path.

       The following target properties may be set to specify content to be
       configured into the file:

         MACOSX_FRAMEWORK_ICON_FILE
         MACOSX_FRAMEWORK_IDENTIFIER
         MACOSX_FRAMEWORK_SHORT_VERSION_STRING
         MACOSX_FRAMEWORK_BUNDLE_VERSION

       CMake variables of the same name may be set to affect all targets in a
       directory that do not have each specific property set.  If a custom
       Info.plist is specified by this property it may of course hard-code
       all the settings instead of using the target properties.

  MAP_IMPORTED_CONFIG_<CONFIG>
       Map from project configuration to IMPORTED target's configuration.

       Set this to the list of configurations of an imported target that may
       be used for the current project's <CONFIG> configuration.  Targets
       imported from another project may not provide the same set of
       configuration names available in the current project.  Setting this
       property tells CMake what imported configurations are suitable for use
       when building the <CONFIG> configuration.  The first configuration in
       the list found to be provided by the imported target is selected.  If
       no matching configurations are available the imported target is
       considered to be not found.  This property is ignored for non-imported
       targets.

  OSX_ARCHITECTURES
       Target specific architectures for OS X.

       The OSX_ARCHITECTURES property sets the target binary architecture for
       targets on OS X.  This property is initialized by the value of the
       variable CMAKE_OSX_ARCHITECTURES if it is set when a target is
       created.  Use OSX_ARCHITECTURES_<CONFIG> to set the binary
       architectures on a per-configuration basis.  <CONFIG> is an upper-case
       name (ex: "OSX_ARCHITECTURES_DEBUG").

  OSX_ARCHITECTURES_<CONFIG>
       Per-configuration OS X binary architectures for a target.

       This property is the configuration-specific version of
       OSX_ARCHITECTURES.

  OUTPUT_NAME
       Output name for target files.

       This sets the base name for output files created for an executable or
       library target.  If not set, the logical target name is used by
       default.

  OUTPUT_NAME_<CONFIG>
       Per-configuration target file base name.

       This is the configuration-specific version of OUTPUT_NAME.

  POST_INSTALL_SCRIPT
       Deprecated install support.

       The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
       way to specify CMake scripts to run before and after installing a
       target.  They are used only when the old INSTALL_TARGETS command is
       used to install the target.  Use the INSTALL command instead.

  PREFIX
       What comes before the library name.

       A target property that can be set to override the prefix (such as
       "lib") on a library name.

  PRE_INSTALL_SCRIPT
       Deprecated install support.

       The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
       way to specify CMake scripts to run before and after installing a
       target.  They are used only when the old INSTALL_TARGETS command is
       used to install the target.  Use the INSTALL command instead.

  PRIVATE_HEADER
       Specify private header files in a FRAMEWORK shared library target.

       Shared library targets marked with the FRAMEWORK property generate
       frameworks on OS X and normal shared libraries on other platforms.
       This property may be set to a list of header files to be placed in the
       PrivateHeaders directory inside the framework folder.  On non-Apple
       platforms these headers may be installed using the PRIVATE_HEADER
       option to the install(TARGETS) command.

  PROJECT_LABEL
       Change the name of a target in an IDE.

       Can be used to change the name of the target in an IDE like Visual
       Studio.

  PUBLIC_HEADER
       Specify public header files in a FRAMEWORK shared library target.

       Shared library targets marked with the FRAMEWORK property generate
       frameworks on OS X and normal shared libraries on other platforms.
       This property may be set to a list of header files to be placed in the
       Headers directory inside the framework folder.  On non-Apple platforms
       these headers may be installed using the PUBLIC_HEADER option to the
       install(TARGETS) command.

  RESOURCE
       Specify resource files in a FRAMEWORK shared library target.

       Shared library targets marked with the FRAMEWORK property generate
       frameworks on OS X and normal shared libraries on other platforms.
       This property may be set to a list of files to be placed in the
       Resources directory inside the framework folder.  On non-Apple
       platforms these files may be installed using the RESOURCE option to
       the install(TARGETS) command.

  RULE_LAUNCH_COMPILE
       Specify a launcher for compile rules.

       See the global property of the same name for details.  This overrides
       the global and directory property for a target.

  RULE_LAUNCH_CUSTOM
       Specify a launcher for custom rules.

       See the global property of the same name for details.  This overrides
       the global and directory property for a target.

  RULE_LAUNCH_LINK
       Specify a launcher for link rules.

       See the global property of the same name for details.  This overrides
       the global and directory property for a target.

  RUNTIME_OUTPUT_DIRECTORY
       Output directory in which to build RUNTIME target files.

       This property specifies the directory into which runtime target files
       should be built.  Multi-configuration generators (VS, Xcode) append a
       per-configuration subdirectory to the specified directory.  There are
       three kinds of target files that may be built: archive, library, and
       runtime.  Executables are always treated as runtime targets.  Static
       libraries are always treated as archive targets.  Module libraries are
       always treated as library targets.  For non-DLL platforms shared
       libraries are treated as library targets.  For DLL platforms the DLL
       part of a shared library is treated as a runtime target and the
       corresponding import library is treated as an archive target.  All
       Windows-based systems including Cygwin are DLL platforms.  This
       property is initialized by the value of the variable
       CMAKE_RUNTIME_OUTPUT_DIRECTORY if it is set when a target is created.

  RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
       Per-configuration output directory for RUNTIME target files.

       This is a per-configuration version of RUNTIME_OUTPUT_DIRECTORY, but
       multi-configuration generators (VS, Xcode) do NOT append a
       per-configuration subdirectory to the specified directory.  This
       property is initialized by the value of the variable
       CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
       created.

  RUNTIME_OUTPUT_NAME
       Output name for RUNTIME target files.

       This property specifies the base name for runtime target files.  It
       overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.  There are
       three kinds of target files that may be built: archive, library, and
       runtime.  Executables are always treated as runtime targets.  Static
       libraries are always treated as archive targets.  Module libraries are
       always treated as library targets.  For non-DLL platforms shared
       libraries are treated as library targets.  For DLL platforms the DLL
       part of a shared library is treated as a runtime target and the
       corresponding import library is treated as an archive target.  All
       Windows-based systems including Cygwin are DLL platforms.

  RUNTIME_OUTPUT_NAME_<CONFIG>
       Per-configuration output name for RUNTIME target files.

       This is the configuration-specific version of RUNTIME_OUTPUT_NAME.

  SKIP_BUILD_RPATH
       Should rpaths be used for the build tree.

       SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic
       generation of an rpath allowing the target to run from the build tree.
       This property is initialized by the value of the variable
       CMAKE_SKIP_BUILD_RPATH if it is set when a target is created.

  SOURCES
       Source names specified for a target.

       Read-only list of sources specified for a target.  The names returned
       are suitable for passing to the set_source_files_properties command.

  SOVERSION
       What version number is this target.

       For shared libraries VERSION and SOVERSION can be used to specify the
       build version and api version respectively.  When building or
       installing appropriate symlinks are created if the platform supports
       symlinks and the linker supports so-names.  If only one of both is
       specified the missing is assumed to have the same version number.  For
       shared libraries and executables on Windows the VERSION attribute is
       parsed to extract a "major.minor" version number.  These numbers are
       used as the image version of the binary.

  STATIC_LIBRARY_FLAGS
       Extra flags to use when linking static libraries.

       Extra flags to use when linking a static library.

  STATIC_LIBRARY_FLAGS_<CONFIG>
       Per-configuration flags for creating a static library.

       This is the configuration-specific version of STATIC_LIBRARY_FLAGS.

  SUFFIX
       What comes after the target name.

       A target property that can be set to override the suffix (such as
       ".so" or ".exe") on the name of a library, module or executable.

  TYPE
       The type of the target.

       This read-only property can be used to test the type of the given
       target.  It will be one of STATIC_LIBRARY, MODULE_LIBRARY,
       SHARED_LIBRARY, EXECUTABLE or one of the internal target types.

  VERSION
       What version number is this target.

       For shared libraries VERSION and SOVERSION can be used to specify the
       build version and api version respectively.  When building or
       installing appropriate symlinks are created if the platform supports
       symlinks and the linker supports so-names.  If only one of both is
       specified the missing is assumed to have the same version number.  For
       executables VERSION can be used to specify the build version.  When
       building or installing appropriate symlinks are created if the
       platform supports symlinks.  For shared libraries and executables on
       Windows the VERSION attribute is parsed to extract a "major.minor"
       version number.  These numbers are used as the image version of the
       binary.

  VS_DOTNET_REFERENCES
       Visual Studio managed project .NET references

       Adds one or more semicolon-delimited .NET references to a generated
       Visual Studio project.  For example, "System;System.Windows.Forms".

  VS_GLOBAL_<variable>
       Visual Studio project-specific global variable.

       Tell the Visual Studio generator to set the global variable
       '<variable>' to a given value in the generated Visual Studio project.
       Ignored on other generators.  Qt integration works better if
       VS_GLOBAL_QtVersion is set to the version FindQt4.cmake found.  For
       example, "4.7.3"

  VS_GLOBAL_KEYWORD
       Visual Studio project keyword.

       Sets the "keyword" attribute for a generated Visual Studio project.
       Defaults to "Win32Proj".  You may wish to override this value with
       "ManagedCProj", for example, in a Visual Studio managed C++ unit test
       project.

  VS_GLOBAL_PROJECT_TYPES
       Visual Studio project type(s).

       Can be set to one or more UUIDs recognized by Visual Studio to
       indicate the type of project.  This value is copied verbatim into the
       generated project file.  Example for a managed C++ unit testing
       project:

        {3AC096D0-A1C2-E12C-1390-A8335801FDAB};{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}

       UUIDs are semicolon-delimited.

  VS_KEYWORD
       Visual Studio project keyword.

       Can be set to change the visual studio keyword, for example QT
       integration works better if this is set to Qt4VSv1.0.

  VS_SCC_AUXPATH
       Visual Studio Source Code Control Aux Path.

       Can be set to change the visual studio source code control auxpath
       property.

  VS_SCC_LOCALPATH
       Visual Studio Source Code Control Local Path.

       Can be set to change the visual studio source code control local path
       property.

  VS_SCC_PROJECTNAME
       Visual Studio Source Code Control Project.

       Can be set to change the visual studio source code control project
       name property.

  VS_SCC_PROVIDER
       Visual Studio Source Code Control Provider.

       Can be set to change the visual studio source code control provider
       property.

  VS_WINRT_EXTENSIONS
       Visual Studio project C++/CX language extensions for Windows Runtime

       Can be set to enable C++/CX language extensions.

  VS_WINRT_REFERENCES
       Visual Studio project Windows Runtime Metadata references

       Adds one or more semicolon-delimited WinRT references to a generated
       Visual Studio project.  For example, "Windows;Windows.UI.Core".

  WIN32_EXECUTABLE
       Build an executable with a WinMain entry point on windows.

       When this property is set to true the executable when linked on
       Windows will be created with a WinMain() entry point instead of of
       just main().This makes it a GUI executable instead of a console
       application.  See the CMAKE_MFC_FLAG variable documentation to
       configure use of MFC for WinMain executables.  This property is
       initialized by the value of the variable CMAKE_WIN32_EXECUTABLE if it
       is set when a target is created.

  XCODE_ATTRIBUTE_<an-attribute>
       Set Xcode target attributes directly.

       Tell the Xcode generator to set '<an-attribute>' to a given value in
       the generated Xcode project.  Ignored on other generators.

------------------------------------------------------------------------------
Properties on Tests

  ATTACHED_FILES
       Attach a list of files to a dashboard submission.

       Set this property to a list of files that will be encoded and
       submitted to the dashboard as an addition to the test result.

  ATTACHED_FILES_ON_FAIL
       Attach a list of files to a dashboard submission if the test fails.

       Same as ATTACHED_FILES, but these files will only be included if the
       test does not pass.

  COST
       Set this to a floating point value.  Tests in a test set will be run
       in descending order of cost.

       This property describes the cost of a test.  You can explicitly set
       this value; tests with higher COST values will run first.

  DEPENDS
       Specifies that this test should only be run after the specified list
       of tests.

       Set this to a list of tests that must finish before this test is run.

  ENVIRONMENT
       Specify environment variables that should be defined for running a
       test.

       If set to a list of environment variables and values of the form
       MYVAR=value those environment variables will be defined while running
       the test.  The environment is restored to its previous state after the
       test is done.

  FAIL_REGULAR_EXPRESSION
       If the output matches this regular expression the test will fail.

       If set, if the output matches one of specified regular expressions,
       the test will fail.For example: PASS_REGULAR_EXPRESSION
       "[^a-z]Error;ERROR;Failed"

  LABELS
       Specify a list of text labels associated with a test.

       The list is reported in dashboard submissions.

  MEASUREMENT
       Specify a CDASH measurement and value to be reported for a test.

       If set to a name then that name will be reported to CDASH as a named
       measurement with a value of 1.  You may also specify a value by
       setting MEASUREMENT to "measurement=value".

  PASS_REGULAR_EXPRESSION
       The output must match this regular expression for the test to pass.

       If set, the test output will be checked against the specified regular
       expressions and at least one of the regular expressions has to match,
       otherwise the test will fail.

  PROCESSORS
       How many process slots this test requires

       Denotes the number of processors that this test will require.  This is
       typically used for MPI tests, and should be used in conjunction with
       the ctest_test PARALLEL_LEVEL option.

  REQUIRED_FILES
       List of files required to run the test.

       If set to a list of files, the test will not be run unless all of the
       files exist.

  RESOURCE_LOCK
       Specify a list of resources that are locked by this test.

       If multiple tests specify the same resource lock, they are guaranteed
       not to run concurrently.

  RUN_SERIAL
       Do not run this test in parallel with any other test.

       Use this option in conjunction with the ctest_test PARALLEL_LEVEL
       option to specify that this test should not be run in parallel with
       any other tests.

  TIMEOUT
       How many seconds to allow for this test.

       This property if set will limit a test to not take more than the
       specified number of seconds to run.  If it exceeds that the test
       process will be killed and ctest will move to the next test.  This
       setting takes precedence over CTEST_TESTING_TIMEOUT.

  WILL_FAIL
       If set to true, this will invert the pass/fail flag of the test.

       This property can be used for tests that are expected to fail and
       return a non zero return code.

  WORKING_DIRECTORY
       The directory from which the test executable will be called.

       If this is not set it is called from the directory the test executable
       is located in.

------------------------------------------------------------------------------
Properties on Source Files

  ABSTRACT
       Is this source file an abstract class.

       A property on a source file that indicates if the source file
       represents a class that is abstract.  This only makes sense for
       languages that have a notion of an abstract class and it is only used
       by some tools that wrap classes into other languages.

  COMPILE_DEFINITIONS
       Preprocessor definitions for compiling a source file.

       The COMPILE_DEFINITIONS property may be set to a semicolon-separated
       list of preprocessor definitions using the syntax VAR or VAR=value.
       Function-style definitions are not supported.  CMake will
       automatically escape the value correctly for the native build system
       (note that CMake language syntax may require escapes to specify some
       values).  This property may be set on a per-configuration basis using
       the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
       name (ex.  "COMPILE_DEFINITIONS_DEBUG").

       CMake will automatically drop some definitions that are not supported
       by the native build tool.  The VS6 IDE does not support definition
       values with spaces (but NMake does).  Xcode does not support
       per-configuration definitions on source files.

       Disclaimer: Most native build tools have poor support for escaping
       certain values.  CMake has work-arounds for many cases but some values
       may just not be possible to pass correctly.  If a value does not seem
       to be escaped correctly, do not attempt to work-around the problem by
       adding escape sequences to the value.  Your work-around may break in a
       future version of CMake that has improved escape support.  Instead
       consider defining the macro in a (configured) header file.  Then
       report the limitation.  Known limitations include:

         #          - broken almost everywhere
         ;          - broken in VS IDE and Borland Makefiles
         ,          - broken in VS IDE
         %          - broken in some cases in NMake
         & |        - broken in some cases on MinGW
         ^ < > \"   - broken in most Make tools on Windows

       CMake does not reject these values outright because they do work in
       some cases.  Use with caution.

  COMPILE_DEFINITIONS_<CONFIG>
       Per-configuration preprocessor definitions on a source file.

       This is the configuration-specific version of COMPILE_DEFINITIONS.
       Note that Xcode does not support per-configuration source file flags
       so this property will be ignored by the Xcode generator.

  COMPILE_FLAGS
       Additional flags to be added when compiling this source file.

       These flags will be added to the list of compile flags when this
       source file builds.  Use COMPILE_DEFINITIONS to pass additional
       preprocessor definitions.

  EXTERNAL_OBJECT
       If set to true then this is an object file.

       If this property is set to true then the source file is really an
       object file and should not be compiled.  It will still be linked into
       the target though.

  Fortran_FORMAT
       Set to FIXED or FREE to indicate the Fortran source layout.

       This property tells CMake whether a given Fortran source file uses
       fixed-format or free-format.  CMake will pass the corresponding format
       flag to the compiler.  Consider using the target-wide Fortran_FORMAT
       property if all source files in a target share the same format.

  GENERATED
       Is this source file generated as part of the build process.

       If a source file is generated by the build process CMake will handle
       it differently in terms of dependency checking etc.  Otherwise having
       a non-existent source file could create problems.

  HEADER_FILE_ONLY
       Is this source file only a header file.

       A property on a source file that indicates if the source file is a
       header file with no associated implementation.  This is set
       automatically based on the file extension and is used by CMake to
       determine is certain dependency information should be computed.

  KEEP_EXTENSION
       Make the output file have the same extension as the source file.

       If this property is set then the file extension of the output file
       will be the same as that of the source file.  Normally the output file
       extension is computed based on the language of the source file, for
       example .cxx will go to a .o extension.

  LABELS
       Specify a list of text labels associated with a source file.

       This property has meaning only when the source file is listed in a
       target whose LABELS property is also set.  No other semantics are
       currently specified.

  LANGUAGE
       What programming language is the file.

       A property that can be set to indicate what programming language the
       source file is.  If it is not set the language is determined based on
       the file extension.  Typical values are CXX C etc.  Setting this
       property for a file means this file will be compiled.  Do not set this
       for header or files that should not be compiled.

  LOCATION
       The full path to a source file.

       A read only property on a SOURCE FILE that contains the full path to
       the source file.

  MACOSX_PACKAGE_LOCATION
       Place a source file inside a Mac OS X bundle, CFBundle, or framework.

       Executable targets with the MACOSX_BUNDLE property set are built as
       Mac OS X application bundles on Apple platforms.  Shared library
       targets with the FRAMEWORK property set are built as Mac OS X
       frameworks on Apple platforms.  Module library targets with the BUNDLE
       property set are built as Mac OS X CFBundle bundles on Apple
       platforms.  Source files listed in the target with this property set
       will be copied to a directory inside the bundle or framework content
       folder specified by the property value.  For bundles the content
       folder is "<name>.app/Contents".  For frameworks the content folder is
       "<name>.framework/Versions/<version>".  For cfbundles the content
       folder is "<name>.bundle/Contents" (unless the extension is changed).
       See the PUBLIC_HEADER, PRIVATE_HEADER, and RESOURCE target properties
       for specifying files meant for Headers, PrivateHeaders, or Resources
       directories.

  OBJECT_DEPENDS
       Additional files on which a compiled object file depends.

       Specifies a semicolon-separated list of full-paths to files on which
       any object files compiled from this source file depend.  An object
       file will be recompiled if any of the named files is newer than it.

       This property need not be used to specify the dependency of a source
       file on a generated header file that it includes.  Although the
       property was originally introduced for this purpose, it is no longer
       necessary.  If the generated header file is created by a custom
       command in the same target as the source file, the automatic
       dependency scanning process will recognize the dependency.  If the
       generated header file is created by another target, an inter-target
       dependency should be created with the add_dependencies command (if one
       does not already exist due to linking relationships).

  OBJECT_OUTPUTS
       Additional outputs for a Makefile rule.

       Additional outputs created by compilation of this source file.  If any
       of these outputs is missing the object will be recompiled.  This is
       supported only on Makefile generators and will be ignored on other
       generators.

  SYMBOLIC
       Is this just a name for a rule.

       If SYMBOLIC (boolean) is set to true the build system will be informed
       that the source file is not actually created on disk but instead used
       as a symbolic name for a build rule.

  WRAP_EXCLUDE
       Exclude this source file from any code wrapping techniques.

       Some packages can wrap source files into alternate languages to
       provide additional functionality.  For example, C++ code can be
       wrapped into Java or Python etc using SWIG etc.  If WRAP_EXCLUDE is
       set to true (1 etc) that indicates then this source file should not be
       wrapped.

------------------------------------------------------------------------------
Properties on Cache Entries

  ADVANCED
       True if entry should be hidden by default in GUIs.

       This is a boolean value indicating whether the entry is considered
       interesting only for advanced configuration.  The mark_as_advanced()
       command modifies this property.

  HELPSTRING
       Help associated with entry in GUIs.

       This string summarizes the purpose of an entry to help users set it
       through a CMake GUI.

  MODIFIED
       Internal management property.  Do not set or get.

       This is an internal cache entry property managed by CMake to track
       interactive user modification of entries.  Ignore it.

  STRINGS
       Enumerate possible STRING entry values for GUI selection.

       For cache entries with type STRING, this enumerates a set of values.
       CMake GUIs may use this to provide a selection widget instead of a
       generic string entry field.  This is for convenience only.  CMake does
       not enforce that the value matches one of those listed.

  TYPE
       Widget type for entry in GUIs.

       Cache entry values are always strings, but CMake GUIs present widgets
       to help users set values.  The GUIs use this property as a hint to
       determine the widget type.  Valid TYPE values are:

         BOOL          = Boolean ON/OFF value.
         PATH          = Path to a directory.
         FILEPATH      = Path to a file.
         STRING        = Generic string value.
         INTERNAL      = Do not present in GUI at all.
         STATIC        = Value managed by CMake, do not change.
         UNINITIALIZED = Type not yet specified.

       Generally the TYPE of a cache entry should be set by the command which
       creates it (set, option, find_library, etc.).

  VALUE
       Value of a cache entry.

       This property maps to the actual value of a cache entry.  Setting this
       property always sets the value without checking, so use with care.

------------------------------------------------------------------------------
Copyright

Copyright 2000-2009 Kitware, Inc., Insight Software Consortium.  All rights
reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.

Neither the names of Kitware, Inc., the Insight Software Consortium, nor the
names of their contributors may be used to endorse or promote products
derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

------------------------------------------------------------------------------
See Also

The following resources are available to get help using CMake:

  Home Page
       http://www.cmake.org

       The primary starting point for learning about CMake.

  Frequently Asked Questions
       http://www.cmake.org/Wiki/CMake_FAQ

       A Wiki is provided containing answers to frequently asked questions.

  Online Documentation
       http://www.cmake.org/HTML/Documentation.html

       Links to available documentation may be found on this web page.

  Mailing List
       http://www.cmake.org/HTML/MailingLists.html

       For help and discussion about using cmake, a mailing list is provided
       at cmake@cmake.org.  The list is member-post-only but one may sign up
       on the CMake web page.  Please first read the full documentation at
       http://www.cmake.org before posting questions to the list.

Summary of helpful links:

  Home: http://www.cmake.org
  Docs: http://www.cmake.org/HTML/Documentation.html
  Mail: http://www.cmake.org/HTML/MailingLists.html
  FAQ:  http://www.cmake.org/Wiki/CMake_FAQ


