There are a few modes devoted to cellular automata.
I also added a bunch of options.  So I am providing a little explanation
so it is not overwhelming.  I also say a little something at the top of the
C file of each.  If your favorite little automaton is not here (or you think
it should be enhanced)... let me know.
The modes are ant, ant3d, bug, demon, dilemma, life, life1d, life3d, loop,
voters, wator, and wire.
use -install if netscape is stealing all your colors... :)
Try using with "-inwindow -verbose" though "xlock -help" may be helpful too.

ant: Turing Machines where the tape is the screen.
 Special options:
  -rule: base 2 string for Turk's Ant
  -truchet: this shows the path (good to use with -size at
    least 10)  Truchet option turned off if its not Turk's ants.

 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of ants
  -cycles <int>: how many cycles before a new ant
  -size <int>: size of ant in pixels

  -neighbors <int>: 0 random, 4 & 8 ants, 3, 6, & 12 bees (9 seemed hard
    to make consistent, but since 3 was done, there should be a way...)
  -eyes: eyes on ant (did not bother for -neighbors 12)
    eyes are backwards on triangular ants (easier to place them).
  -verbose: verbose to help identify ant (good to use with -inwindow)

ant3d: Turing Machines where the tape is the screen.
 Special options:
  -rule: base 4 string for Turk's Ant

 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of ants
  -cycles <int>: how many cycles before a new ant
  -size <int>: size of ant in pixels

  -eyes: eyes on ant (uhh its just one big eye)
    eyes are backwards on triangular ants (easier to place them).
  -verbose: verbose to help to identify ant (good to use with -inwindow)

bug: Evolving bugs (big squares) learn to walk straight (except in the garden)
   to pick up bacteria food (little squares) unlike other modes there is no
   wrapping (this to me is logical because its like the bug is in a glass
   jar)
 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of bugs
  -cycles <int>: how many cycles before a new world
  -size <int>: size of bug in pixels

  -eyes  eyes on bug
  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3 & 12
    triangular (9 seemed hard to make consistent, but since 3 was done,
    there should be a way...)

demon: A simple modulo automata
 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of states
  -cycles <int>: how many cycles before a new screen
  -size <int>: size of cell in pixels

  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3, 9 & 12
    triangular

dilemma: Happy (good) and Mean (bad) cells compete for domination
 Special options:
  -conscious: (default) uses its own state in calculation of payoff
  +conscious: does not use its own state in calculation of payoff
  -bonus <flt>: payoff for defecting
 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of bad or defecting initial cells
  -cycles <int>: how many cycles before a new screen
  -size <int>: size of cell in pixels (mean faces and happy faces become
    polygons and circles if not 0)

  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3, 9 & 12
    triangular (mean faces and happy faces become polygons and circles if
    not 4 or 8)

life:
 Special options:
  -label: pattern name and rule
  -serial: picking of sequential patterns with a rule (use with
    middle button)
  -rule <string>: survival and birth parameters formated
    B<neighborhood>/S<neighborhood>, so John Conway's rule is B3/S23,
      David Bell's HighLife rule is B36/S23 (also -highlife),
      Nathan Thompson's Day and Night rule is B3678/S34678,
      (also -daynight)
    Two format exceptions:
      -rule P: Picks a random rule from all rules that have known patterns
      -rule G: Picks a random rule from all rules that have known gliders
  -conway: Conway's original Life rule B3/S23
  -highlife: Bell's  Life rule B36/S23
  -daynight: Thompson's  Life rule B3678/S34678
  -callahan: Paul Callahan's B2a/S2b34 hexagonal life
  -andreen: Bob Andreen's B2a3a4b/S2a2b4a hexagonal life
  -trilife: Carter Bays' B45/S34 triangular life
  -trilife1: Carter Bays' B456/S45 triangular life
  -trilife2: Carter Bays' B45/S23 triangular life
  -lifefile <filename>: only the #P format of xlife
    There is a limit of 128 initial live cells set by NUMFILEPTS in life.c.

 Mode options:
  -cycles <int>: how many cycles before a new lifeform
  -count <int>: number of cycles before glider (if one exists)
  -delay <int>: controls the length of a cycle in microsec
  -size <int>: size of cell in pixels, if 0 may default to bitmap

  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3, 9 & 12
    triangular
  -verbose: verbose to help identify life (good to use with -inwindow)

xlock -mode life -rule B346S23 -neighbors 7 -nolock

Examples of recent searches for patterns
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1000 -neighbors 12 -rule B456S12 -repeat 72 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1000 -neighbors 12 -rule B46S24 -repeat 6 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1000 -neighbors 12 -rule B46S246 -repeat 30 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1000 -neighbors 12 -rule B456S34 -repeat 2 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 300 -neighbors 12 -rule B4S35 -repeat 4 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1000 -neighbors 12 -rule B456S45 -repeat 6 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1000 -neighbors 12 -rule B4S456 -repeat 18 \
   -patternsearch -delay 1 > junk
This searches for patterns with no multiple of 8.
Will put "found" in output after the pattern if meets this criteria.
xlock -mode life -count 0 -inwindow -neighbors 8 \
 -erasemode no_fade -rule B3/S245 -cycles 1190 -serial -geometry 900x600 \
 -patternsearch -delay 0 -repeat 8


xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 500 -neighbors 6 -rule B2S35 -repeat 60 \
   -patternsearch -delay 1 > junk
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 1500 -neighbors 6 -rule B245S3 -repeat 6 \
   -patternsearch -delay 1 > junk

Example of a search for gliders
xlock -mode life -count 0 -inwindow -erasemode no_fade -size 1 \
  -cycles 600 -neighbors 12 -rule B3S23 -repeat 72 \
   -glidersearch -delay 1 > junk


life1d: 1 dimensional life
 Special options:
  -totalistic: (default) totalistic 1d life
  +totalistic: LCAU collection  These rules may not be symmetric and are
    more general (totalistic is a subset).

 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -cycles <int>: how many pages before a new lifeform
  -size <int>: size of cell in pixels, if 0 may default to bitmap

  -verbose: verbose to help identify life (to be referenced with the source
    code) (good to use with -inwindow)


life3d: 3 dimensional life
 Special options:
  -label: pattern name and rule
  -serial: picking of sequential patterns with a rule (use with
    middle button)
  -rule <string>: survival and birth parameters formated
    B<neighborhood>/S<neighborhood>, so Carter Bays' rules are
    B5/S45, B6/S567, B5/S56, B5/S678, and B67/S67.  There is
    currently no way of accessing the a total of 10 to 26 neighbors
    this way (is there a need?).

    Two format exceptions:
      -rule P: Picks a random rule from all rules that have known patterns
      -rule G: Picks a random rule from all rules that have known gliders
  -rule B3/S3 -neighbors 12
  -rule B3S456 -neighbors 12
  -rule B4/S45 -neighbors 18
  -rule B4/S45 -neighbors 20 
  -lifefile <filename>: similar to the #P format of xlife, 3 integers are
    required to center, sequential linefeeds imply a depth change
    There is a limit of 84 initial live cells set by NUMFILEPTS in life3d.c.

 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of cycles before glider (if one exists)
  -cycles <int>: how many cycles before a new lifeform

  -verbose: verbose to help identify life (good to use with -inwindow)

Examples of pattern search (pick one -neighbors line...)
xlock -mode life3d -count 0 -inwindow -erasemode no_fade -size 1 \
 -neighbors 26 -rule B5S25 -repeat 4 \
 -neighbors 26 -rule B5S27 -repeat 12 \
 -neighbors 26 -rule B5S35 -repeat 12 \
 -neighbors 26 -rule B5S36 -repeat 12 \
 -neighbors 26 -rule B5S38 -repeat 4 \
 -neighbors 26 -rule B5S4 -repeat 4 \
 -neighbors 26 -rule B5S47 -repeat 4 \
 -neighbors 26 -rule B6S57 -repeat 2 \
 -neighbors 26 -rule B5S58 -repeat 10 \
 -neighbors 26 -rule B5S8 -repeat 2 \
 -cycles 190 -patternsearch -delay 1 +draw
xlock -mode life3d -inwindow -neighbors 12 -count 0 \
 -erasemode no_fade -rule B3/S3 -cycles 190 -delay 0 -patternsearch -repeat 4
xlock -mode life3d -inwindow -neighbors 12 \
 -erasemode no_fade -rule B3/S456 -cycles 185 -delay 0 -patternsearch -repeat 2
xlock -mode life3d -inwindow -neighbors 18 \
 -erasemode no_fade -rule B4/S45 -cycles 200 -delay 0 -patternsearch \
 -repeat 38 -count 0
xlock -mode life3d -inwindow -neighbors 20 \
 -erasemode no_fade -rule B4/S45 -cycles 190 -delay 0 -patternsearch \
 -repeat 6 -count 0

Example of checking pattern in junk.3dlife file 
xlock -mode life3d -inwindow -neighbors 12 -count 0 \
 -erasemode no_fade -rule B3/S3 -cycles 190 -serial -geometry 900x600 \
 -delay 4000000 -lifefile junk.3dlife
xlock -mode life3d -inwindow -neighbors 12 \
 -erasemode no_fade -rule B3/S456 -cycles 185 -serial -geometry 900x600 \
 -delay 4000000 -lifefile junk.3dlife
xlock -mode life3d -inwindow -neighbors 18 \
 -erasemode no_fade -rule B4/S45 -cycles 190 -serial -geometry 900x600 \
 -delay 4000000 -lifefile junk.3dlife
xlock -mode life3d -inwindow -neighbors 20 \
 -erasemode no_fade -rule B4/S45 -cycles 190 -serial -geometry 900x600 \
 -delay 4000000 -lifefile junk.3dlife


loop: Chris Langton's loops this is far as great example of a
    self-generating life form.
    David Bagley (i.e. myself) made up the hexagon version.
    EvoLoopS Evolving SDSR Loop Simulator idea (-evolve) stolen
    from Hiroki Sayama <sayama AT is.s.u-tokyo.ac.jp>
    LoopS - Structurally Dissolvable Self-Reproducing Loop
    Simulator (-dissolve and/or -sheath) idea also stolen from
    Hiroki Sayama.

 Special options:
  -wrap: (default) wrap the borders
  +wrap: do not wrap the borders
  -langton: normal loops, works for both 4 or 6 neighbors
  -evolve: evolving loops
  -dissolve: dissolving state for structurally dissolvable loops
  -sheath: sheath extension (can be combined with -dissolve)

 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of defects (may be less)
  -cycles <int>: how many cycles before it starts over
  -size <int>: size of cell in pixels

  -neighbors <int>: 0 random, 4 rectangular, 6 hexagonal
  -verbose: verbose to help identify loop (good to use with -inwindow)

voters: your political belief is influenced by your neighbor
 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: number of parties 2 or 3 (3 may not be available)
  -cycles <int>: how many cycles before a new world starts
  -size <int>: size of cell in pixels (elephants and donkeys become
    squares and circles if not 0, hammer/sickle unavailable)

  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3, 9 & 12
    triangular (elephants and donkeys become squares and circles if
    not 4 or 8, hammer/sickle unavailable)

wator: sharks and fish on a water torus planet
 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: breed time for the fish
  -cycles <int>: how many cycles before a new world starts
  -size <int>: size of cell in pixels (sharks and fish become polygons
    and circles if not 0)

  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3, 9 & 12
    triangular (sharks and fish become polygons and circles if not 4 or 8)

wire: (this mode lacks a good circuit generator)  unlike other modes there
   is no wrapping
 Mode options:
  -delay <int>: controls the length of a cycle in microsec
  -count <int>: length of random circuit
  -cycles <int>: how many cycles before a circuit
  -size <int>: size of cell in pixels

  -neighbors <int>: 0 random, 4 & 8 rectangular, 6 hexagonal, 3, 9 & 12
    triangular
