# Network Configuration Setting Specification

This part documents the properties and value types of each "Setting" object that composes the basic unit of NetworkManager configuration, the "Connection". Each Connection object is simply a dictionary mapping setting names (like "wimax" or "bluetooth") to a dictionary of key/value pairs that represents each itself.

## Configuration Settings

Table 1. 802-1x setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    802-1x
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    eap
    array of string
    []
| The allowed EAP method to be used when authenticating to the network with 802.1x. Valid methods are: 'leap', 'md5', 'tls', 'peap', 'ttls', and 'fast'. Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.
    identity
    string
| Identity string for EAP authentication methods. Often the user's user or login name.
    anonymous-identity
    string
| Anonymous identity string for EAP authentication methods. Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS.
    pac-file
    string
| UTF-8 encoded file path containing PAC for EAP-FAST.
    ca-cert
    byte array
    []
| Contains the CA certificate if used by the EAP method specified in the 'eap' property. Certificate data is specified using a 'scheme'; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string 'file://' and ending with a terminating NULL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended.
    ca-path
    string
| UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the 'ca-cert' property.
    subject-match
    string
| Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed.
    altsubject-matches
    array of string
    []
| List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    client-cert
    byte array
    []
| Contains the client certificate if used by the EAP method specified in the 'eap' property. Certificate data is specified using a 'scheme'; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string 'file://' and ending with a terminating NULL byte.
    phase1-peapver
    string
| Forces which PEAP version is used when PEAP is set as the EAP method in 'eap' property. When unset, the version reported by the server will be used. Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version. To do so, this property may be set to '0' or '1' to force that specific PEAP version.
    phase1-peaplabel
    string
| Forces use of the new PEAP label during key derivation. Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1. Set to '1' to force use of the new PEAP label. See the wpa_supplicant documentation for more details.
    phase1-fast-provisioning
    string
| Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the #NMSetting8021x:eap property. Allowed values are '0' (disabled), '1' (allow unauthenticated provisioning), '2' (allow authenticated provisioning), and '3' (allow both authenticated and unauthenticated provisioning). See the wpa_supplicant documentation for more details.
    phase2-auth
    string
| Specifies the allowed 'phase 2' inner non-EAP authentication methods when an EAP method that uses an inner TLS tunnel is specified in the 'eap' property. Recognized non-EAP phase2 methods are 'pap', 'chap', 'mschap', 'mschapv2', 'gtc', 'otp', 'md5', and 'tls'. Each 'phase 2' inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    phase2-autheap
    string
| Specifies the allowed 'phase 2' inner EAP-based authentication methods when an EAP method that uses an inner TLS tunnel is specified in the 'eap' property. Recognized EAP-based 'phase 2' methods are 'md5', 'mschapv2', 'otp', 'gtc', and 'tls'. Each 'phase 2' inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    phase2-ca-cert
    byte array
    []
| Contains the 'phase 2' CA certificate if used by the EAP method specified in the 'phase2-auth' or 'phase2-autheap' properties. Certificate data is specified using a 'scheme'; two are currentlysupported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string 'file://' and ending with a terminating NULL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended.
    phase2-ca-path
    string
| UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the 'phase2-ca-cert' property.
    phase2-subject-match
    string
| Substring to be matched against the subject of the certificate presented by the authentication server during the inner 'phase2' authentication. When unset, no verification of the authentication server certificate's subject is performed.
    phase2-altsubject-matches
    array of string
    []
| List of strings to be matched against List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner 'phase 2' authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    phase2-client-cert
    byte array
    []
| Contains the 'phase 2' client certificate if used by the EAP method specified in the 'phase2-auth' or 'phase2-autheap' properties. Certificate data is specified using a 'scheme'; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string 'file://' and ending with a terminating NULL byte.
    password
    string
| UTF-8 encoded password used for EAP authentication methods.
    password-flags
    uint32
    0
| Flags indicating how to handle the 802.1x password. (see the section called “Secret flag types” for flag values)
    password-raw
    byte array
    []
| Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both 'password' and 'password-raw' are given, 'password' is preferred.
    password-raw-flags
    uint32
    0
| Flags indicating how to handle the 802.1x password byte array. (see the section called “Secret flag types” for flag values)
    private-key
    byte array
    []
| Contains the private key when the 'eap' property is set to 'tls'. Key data is specified using a 'scheme'; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string 'file://' and ending with a terminating NULL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the 'private-key-password' property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string 'file://' and and ending with a terminating NULL byte, and as with the blob scheme the 'private-key-password' property must be set to the password used to decode the PKCS#12 private key and certificate.
    private-key-password
    string
| The password used to decrypt the private key specified in the 'private-key' property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key.
    private-key-password-flags
    uint32
    0
| Flags indicating how to handle the 802.1x private key password. (see the section called “Secret flag types” for flag values)
    phase2-private-key
    byte array
    []
| Contains the 'phase 2' inner private key when the 'phase2-auth' or 'phase2-autheap' property is set to 'tls'. Key data is specified using a 'scheme'; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string 'file://' and ending with a terminating NULL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the 'phase2-private-key-password' property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string 'file://' and and ending with a terminating NULL byte, and as with the blob scheme the 'phase2-private-key-password' property must be set to the password used to decode the PKCS#12 private key and certificate.
    phase2-private-key-password
    string
| The password used to decrypt the 'phase 2' private key specified in the 'private-key' property when the phase2 private key either uses the path scheme, or if the phase2 private key is a PKCS#12 format key.
    phase2-private-key-password-flags
    uint32
    0
| Flags indicating how to handle the 802.1x phase2 private key password. (see the section called “Secret flag types” for flag values)
    pin
    string
| PIN used for EAP authentication methods.
    pin-flags
    uint32
    0
| Flags indicating how to handle the 802.1x PIN. (see the section called “Secret flag types” for flag values)
    system-ca-certs
    boolean
    FALSE
| When TRUE, overrides 'ca-path' and 'phase2-ca-path' properties using the system CA directory specified at configure time with the --system-ca-path switch. The certificates in this directory are added to the verification chain in addition to any certificates specified by the 'ca-cert' and 'phase2-ca-cert' properties.

Table 2. adsl setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    adsl
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    username
    string
| Username used to authenticate with the pppoa service.
    password
    string
| Password used to authenticate with the pppoa service.
    password-flags
    uint32
    0
| Flags indicating how to handle the ADSL password. (see the section called “Secret flag types” for flag values)
    protocol
    string
| ADSL connection protocol.
    encapsulation
    string
| Encapsulation of ADSL connection
    vpi
    uint32
    0
| VPI of ADSL connection
    vci
    uint32
    0
| VCI of ADSL connection

Table 3. bluetooth setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    bluetooth
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    bdaddr
    byte array
    []
| The Bluetooth address of the device
    type
    string
| Either 'dun' for Dial-Up Networking connections or 'panu' for Personal Area Networking connections.

Table 4. bond setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    bond
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    interface-name
    string
| The name of the virtual in-kernel bonding network interface
    options
    dict of (string::string)
    [ ]
| Dictionary of key/value pairs of bonding options. Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).

Table 5. bridge setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    bridge
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    interface-name
    string
| The name of the virtual in-kernel bridging network interface
    stp
    boolean
    TRUE
| Controls whether Spanning Tree Protocol (STP) is enabled for this bridge.
    priority
    uint32
    128
| Sets the Spanning Tree Protocol (STP) priority for this bridge. Lower values are 'better'; the lowest priority bridge will be elected the root bridge.
    forward-delay
    uint32
    15
| The Spanning Tree Protocol (STP) forwarding delay, in seconds.
    hello-time
    uint32
    2
| The Spanning Tree Protocol (STP) hello time, in seconds.
    max-age
    uint32
    20
| The Spanning Tree Protocol (STP) maximum message age, in seconds.
    ageing-time
    uint32
    300
| The ethernet MAC address aging time, in seconds.

Table 6. bridge-port setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    bridge-port
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    priority
    uint32
    32
| The Spanning Tree Protocol (STP) priority of this bridge port
    path-cost
    uint32
    100
| The Spanning Tree Protocol (STP) port cost for destinations via this port.
    hairpin-mode
    boolean
    FALSE
| Enables or disabled 'hairpin mode' for the port, which allows frames to be sent back out through the port the frame was received on.

Table 7. cdma setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    cdma
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    number
    string
| Number to dial when establishing a PPP data session with the CDMA-based mobile broadband network. If not specified, the default number (#777) is used when required.
    username
    string
| Username used to authenticate with the network, if required. Note that many providers do not require a username or accept any username.
    password
    string
| Password used to authenticate with the network, if required. Note that many providers do not require a password or accept any password.
    password-flags
    uint32
    0
| Flags indicating how to handle the CDMA password. (see the section called “Secret flag types” for flag values)

Table 8. connection setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    connection
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    id
    string
| User-readable connection identifier/name. Must be one or more characters and may change over the lifetime of the connection if the user decides to rename it.
    uuid
    string
| Universally unique connection identifier. Must be in the format '2815492f-7e56-435e-b2e9-246bd7cdc664' (ie, contains only hexadecimal characters and '-'). The UUID should be assigned when the connection is created and never changed as long as the connection still applies to the same network. For example, it should not be changed when the user changes the connection's 'id', but should be recreated when the WiFi SSID, mobile broadband network provider, or the connection type changes.
    type
    string
| Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, '802-3-ethernet' or '802-11-wireless' or 'bluetooth', etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, 'vpn' or 'bridge', etc).
    permissions
    array of string
    []
| An array of strings defining what access a given user has to this connection. If this is NULL or empty, all users are allowed to access this connection. Otherwise a user is allowed to access this connection if and only if they are in this array. Each entry is of the form "[type]:[id]:[reserved]", for example: "user:dcbw:blah" At this time only the 'user' [type] is allowed. Any other values are ignored and reserved for future use. [id] is the username that this permission refers to, which may not contain the ':' character. Any [reserved] information (if present) must be ignored and is reserved for future use. All of [type], [id], and [reserved] must be valid UTF-8.
    autoconnect
    boolean
    TRUE
| If TRUE, NetworkManager will activate this connection when its network resources are available. If FALSE, the connection must be manually activated by the user or some other mechanism.
    timestamp
    uint64
    0
| Timestamp (in seconds since the Unix Epoch) that the connection was last successfully activated. Settings services should update the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp.
    read-only
    boolean
    FALSE
| If TRUE, the connection is read-only and cannot be changed by the user or any other mechanism. This is normally set for system connections whose plugin cannot yet write updated connections back out.
    zone
    string
| The trust level of a the connection.Free form case-insensitive string (for example "Home", "Work", "Public"). NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall.
    master
    string
| Interface name of the master device or UUID of the master connection
    slave-type
    string
| Setting name describing the type of slave this connection is (ie, 'bond') or NULL if this connection is not a slave.
    secondaries
    array of string
    []
| List of connection UUIDs that should be activated when the base connection itself is activated.

Table 9. gsm setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    gsm
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    number
    string
| Number to dial when establishing a PPP data session with the GSM-based mobile broadband network. Many modems do not require PPP for connections to the mobile network and thus this property should be left blank, which allows NetworkManager to select the appropriate settings automatically.
    username
    string
| Username used to authenticate with the network, if required. Note that many providers do not require a username or accept any username.
    password
    string
| Password used to authenticate with the network, if required. Note that many providers do not require a password or accept any password.
    password-flags
    uint32
    0
| Flags indicating how to handle the GSM password. (see the section called “Secret flag types” for flag values)
    apn
    string
| The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network. The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9.
    network-id
    string
| The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration. If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.
    network-type
    int32
    -1
| Network preference to force the device to only use specific network technologies. The permitted values are: -1: any, 0: 3G only, 1: GPRS/EDGE only, 2: prefer 3G, 3: prefer 2G, 4: prefer 4G/LTE, 5: 4G/LTE only. Note that not all devices allow network preference control.
    pin
    string
| If the SIM is locked with a PIN it must be unlocked before any other operations are requested. Specify the PIN here to allow operation of the device.
    pin-flags
    uint32
    0
| Flags indicating how to handle the GSM SIM PIN. (see the section called “Secret flag types” for flag values)
    allowed-bands
    uint32
    1
| Bitfield of allowed frequency bands. Note that not all devices allow frequency band control.
    home-only
    boolean
    FALSE
| When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.

Table 10. infiniband setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    infiniband
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    mac-address
    byte array
    []
| If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    mtu
    uint32
    0
| If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    transport-mode
    string
| The IPoIB transport mode. Either 'datagram' or 'connected'.

Table 11. ipv4 setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    ipv4
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    method
    string
| IPv4 configuration method. If 'auto' is specified then the appropriate automatic method (DHCP, PPP, etc) is used for the interface and most other properties can be left unset. If 'link-local' is specified, then a link-local address in the 169.254/16 range will be assigned to the interface. If 'manual' is specified, static IP addressing is used and at least one IP address must be given in the 'addresses' property. If 'shared' is specified (indicating that this connection will provide network access to other computers) then the interface is assigned an address in the 10.42.x.1/24 range and a DHCP and forwarding DNS server are started, and the interface is NAT-ed to the current default network connection. 'disabled' means IPv4 will not be used on this connection. This property must be set.
    dns
    array of uint32
    []
| List of DNS servers (network byte order). For the 'auto' method, these DNS servers are appended to those (if any) returned by automatic configuration. DNS servers cannot be used with the 'shared', 'link-local', or 'disabled' methods as there is no upstream network. In all other methods, these DNS servers are used as the only DNS servers for this connection.
    dns-search
    array of string
    []
| List of DNS search domains. For the 'auto' method, these search domains are appended to those returned by automatic configuration. Search domains cannot be used with the 'shared', 'link-local', or 'disabled' methods as there is no upstream network. In all other methods, these search domains are used as the only search domains for this connection.
    addresses
    array of array of uint32
    []
| Array of IPv4 address structures. Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet. For the 'auto' method, given IP addresses are appended to those returned by automatic configuration. Addresses cannot be used with the 'shared', 'link-local', or 'disabled' methods as addressing is either automatic or disabled with these methods.
    routes
    array of array of uint32
    []
| Array of IPv4 route structures. Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. For the 'auto' method, given IP routes are appended to those returned by automatic configuration. Routes cannot be used with the 'shared', 'link-local', or 'disabled', methods as there is no upstream network.
    ignore-auto-routes
    boolean
    FALSE
| When the method is set to 'auto' and this property to TRUE, automatically configured routes are ignored and only routes specified in the 'routes' property, if any, are used.
    ignore-auto-dns
    boolean
    FALSE
| When the method is set to 'auto' and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the 'dns' and 'dns-search' properties, if any, are used.
    dhcp-client-id
    string
| A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options.
    dhcp-send-hostname
    boolean
    TRUE
| If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer. If the 'dhcp-hostname' property is empty and this property is TRUE, the current persistent hostname of the computer is sent.
    dhcp-hostname
    string
| If the 'dhcp-send-hostname' property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease.
    never-default
    boolean
    FALSE
| If TRUE, this connection will never be the default IPv4 connection, meaning it will never be assigned the default route by NetworkManager.
    may-fail
    boolean
    TRUE
| If TRUE, allow overall network configuration to proceed even if IPv4 configuration times out. Note that at least one IP configuration must succeed or overall network configuration will still fail. For example, in IPv6-only networks, setting this property to TRUE allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.

Table 12. ipv6 setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    ipv6
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    method
    string
| IPv6 configuration method. If 'auto' is specified then the appropriate automatic method (PPP, router advertisement, etc) is used for the device and most other properties can be left unset. To force the use of DHCP only, specify 'dhcp'; this method is only valid for ethernet-based hardware. If 'link-local' is specified, then an IPv6 link-local address will be assigned to the interface. If 'manual' is specified, static IP addressing is used and at least one IP address must be given in the 'addresses' property. If 'ignore' is specified, IPv6 configuration is not done. This property must be set. NOTE: the 'shared' methodis not yet supported.
    dhcp-hostname
    string
| The specified name will be sent to the DHCP server when acquiring a lease.
    dns
    array of byte array
    []
| Array of DNS servers, where each member of the array is a byte array containing the IPv6 address of the DNS server (in network byte order). For the 'auto' method, these DNS servers are appended to those (if any) returned by automatic configuration. DNS servers cannot be used with the 'shared' or 'link-local' methods as there is no usptream network. In all other methods, these DNS servers are used as the only DNS servers for this connection.
    dns-search
    array of string
    []
| List of DNS search domains. For the 'auto' method, these search domains are appended to those returned by automatic configuration. Search domains cannot be used with the 'shared' or 'link-local' methods as there is no upstream network. In all other methods, these search domains are used as the only search domains for this connection.
    addresses
    array of (byte array, uint32, byte array)
    []
| Array of IPv6 address structures. Each IPv6 address structure is composed of 3 members, the first being a byte array containing the IPv6 address (network byte order), the second a 32-bit integer containing the IPv6 address prefix, and the third a byte array containing the IPv6 address (network byte order) of the gateway associated with this address, if any. If no gateway is given, the third element should be given as all zeros. For the 'auto' method, given IP addresses are appended to those returned by automatic configuration. Addresses cannot be used with the 'shared' or 'link-local' methods as the interface is automatically assigned an address with these methods.
    routes
    array of (byte array, uint32, byte array, uint32)
    []
| Array of IPv6 route structures. Each IPv6 route structure is composed of 4 members; the first being the destination IPv6 network or address (network byte order) as a byte array, the second the destination network or address IPv6 prefix, the third being the next-hop IPv6 address (network byte order) if any, and the fourth being the route metric. For the 'auto' method, given IP routes are appended to those returned by automatic configuration. Routes cannot be used with the 'shared' or 'link-local' methods because there is no upstream network.
    ignore-auto-routes
    boolean
    FALSE
| When the method is set to 'auto' or 'dhcp' and this property is set to TRUE, automatically configured routes are ignored and only routes specified in the 'routes' property, if any, are used.
    ignore-auto-dns
    boolean
    FALSE
| When the method is set to 'auto' or 'dhcp' and this property is set to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the 'dns' and 'dns-search' properties, if any, are used.
    never-default
    boolean
    FALSE
| If TRUE, this connection will never be the default IPv6 connection, meaning it will never be assigned the default IPv6 route by NetworkManager.
    may-fail
    boolean
    TRUE
| If TRUE, allow overall network configuration to proceed even if IPv6 configuration times out. Note that at least one IP configuration must succeed or overall network configuration will still fail. For example, in IPv4-only networks, setting this property to TRUE allows the overall network configuration to succeed if IPv6 configuration fails but IPv4 configuration completes successfully.
    ip6-privacy
    int32
    -1
| Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941. If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64. This enhances privacy, but could cause problems in some applications, on the other hand. The permitted values are: 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses).

Table 13. 802-11-olpc-mesh setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    802-11-olpc-mesh
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    ssid
    byte array
    []
| SSID of the mesh network to join.
    channel
    uint32
    0
| Channel on which the mesh network to join is located.
    dhcp-anycast-address
    byte array
    []
| Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the the request.

Table 14. ppp setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    ppp
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    noauth
    boolean
    TRUE
| If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client. If FALSE, require authentication from the remote side. In almost all cases, this should be TRUE.
    refuse-eap
    boolean
    FALSE
| If TRUE, the EAP authentication method will not be used.
    refuse-pap
    boolean
    FALSE
| If TRUE, the PAP authentication method will not be used.
    refuse-chap
    boolean
    FALSE
| If TRUE, the CHAP authentication method will not be used.
    refuse-mschap
    boolean
    FALSE
| If TRUE, the MSCHAP authentication method will not be used.
    refuse-mschapv2
    boolean
    FALSE
| If TRUE, the MSCHAPv2 authentication method will not be used.
    nobsdcomp
    boolean
    FALSE
| If TRUE, BSD compression will not be requested.
    nodeflate
    boolean
    FALSE
| If TRUE, 'deflate' compression will not be requested.
    no-vj-comp
    boolean
    FALSE
| If TRUE, Van Jacobsen TCP header compression will not be requested.
    require-mppe
    boolean
    FALSE
| If TRUE, MPPE (Microsoft Point-to-Point Encrpytion) will be required for the PPP session. If either 64-bit or 128-bit MPPE is not available the session will fail. Note that MPPE is not used on mobile broadband connections.
    require-mppe-128
    boolean
    FALSE
| If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encrpytion) will be required for the PPP session, and the 'require-mppe' property must also be set to TRUE. If 128-bit MPPE is not available the session will fail.
    mppe-stateful
    boolean
    FALSE
| If TRUE, stateful MPPE is used. See pppd documentation for more information on stateful MPPE.
    crtscts
    boolean
    FALSE
| If TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals. This value should normally be set to FALSE.
    baud
    uint32
    0
| If non-zero, instruct pppd to set the serial port to the specified baudrate. This value should normally be left as 0 to automatically choose the speed.
    mru
    uint32
    0
| If non-zero, instruct pppd to request that the peer send packets no larger than the specified size. If non-zero, the MRU should be between 128 and 16384.
    mtu
    uint32
    0
| If non-zero, instruct pppd to send packets no larger than the specified size.
    lcp-echo-failure
    uint32
    0
| If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer. The 'lcp-echo-interval' property must also be set to a non-zero value if this property is used.
    lcp-echo-interval
    uint32
    0
| If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value). Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this.

Table 15. pppoe setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    pppoe
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    service
    string
| If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified serivce. For most providers, this should be left blank. It is only required if there are multiple access concentrators or a specific service is known to be required.
    username
    string
| Username used to authenticate with the PPPoE service.
    password
    string
| Password used to authenticate with the PPPoE service.
    password-flags
    uint32
    0
| Flags indicating how to handle the PPPoE password. (see the section called “Secret flag types” for flag values)

Table 16. serial setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    serial
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    baud
    uint32
    57600
| Speed to use for communication over the serial port. Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed.
    bits
    uint32
    8
| Byte-width of the serial communication. The 8 in '8n1' for example.
    parity
    gchar
    110
| Parity setting of the serial port. Either 'E' for even parity, 'o' for odd parity, or 'n' for no parity.
    stopbits
    uint32
    1
| Number of stop bits for communication on the serial port. Either 1 or 2. The 1 in '8n1' for example.
    send-delay
    uint64
    0
| Time to delay between each byte sent to the modem, in microseconds.

Table 17. vlan setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    vlan
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    interface-name
    string
| If given, specifies the kernel name of the VLAN interface. If not given, a default name will be constructed from the interface described by the parent interface and the 'id' property, ex 'eth2.1'. The parent interface may be given by the 'parent' property or by a hardware address property, eg the 'wired' settings' 'mac-address' property.
    parent
    string
| If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created. If this property is not specified, the connection must contain a hardware address in a hardware-specific setting, like the 'wired' settings' 'mac-address' property.
    id
    uint32
    0
| The VLAN indentifier the interface created by this connection should be assigned.
    flags
    uint32
    0
| One or more flags which control the behavior and features of the VLAN interface. Flags include reordering of output packet headers (0x01), use of the GVRP protocol (0x02), and loose binding of the interface to its master device's operating state (0x04).
    ingress-priority-map
    array of string
    []
| For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities. The mapping is given in the format 'from:to' where both 'from' and 'to' are unsigned integers, ie '7:3'.
    egress-priority-map
    array of string
    []
| For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities. The mapping is given in the format 'from:to' where both 'from' and 'to' are unsigned integers, ie '7:3'.

Table 18. vpn setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    vpn
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    service-type
    string
| D-Bus service name of the VPN plugin that this setting uses to connect to its network. i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin.
    user-name
    string
| If the VPN connection requires a user name for authentication, that name should be provided here. If the connection is available to more than one user, and the VPN requires each user to supply a different name, then leave this property empty. If this property is empty, NetworkManager will automatically supply the username of the user which requested the VPN connection.
    data
    dict of (string::string)
    [ ]
| Dictionary of key/value pairs of VPN plugin specific data. Both keys and values must be strings.
    secrets
    dict of (string::string)
    [ ]
| Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys. Both keys and values must be strings.

Table 19. wimax setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    wimax
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    network-name
    string
| Network Service Provider (NSP) name of the WiMAX network this connection should use.
    mac-address
    byte array
    []
| If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing).

Table 20. 802-3-ethernet setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    802-3-ethernet
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    port
    string
| Specific port type to use if multiple the device supports multiple attachment methods. One of 'tp' (Twisted Pair), 'aui' (Attachment Unit Interface), 'bnc' (Thin Ethernet) or 'mii' (Media Independent Interface. If the device supports only one port type, this setting is ignored.
    speed
    uint32
    0
| If non-zero, request that the device use only the specified speed. In Mbit/s, ie 100 == 100Mbit/s.
    duplex
    string
| If specified, request that the device only use the specified duplex mode. Either 'half' or 'full'.
    auto-negotiate
    boolean
    TRUE
| If TRUE, allow auto-negotiation of port speed and duplex mode. If FALSE, do not allow auto-negotiation,in which case the 'speed' and 'duplex' properties should be set.
    mac-address
    byte array
    []
| If specified, this connection will only apply to the ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    cloned-mac-address
    byte array
    []
| If specified, request that the device use this MAC address instead of its permanent MAC address. This is known as MAC cloning or spoofing.
    mac-address-blacklist
    array of string
    []
| If specified, this connection will never apply to the ethernet device whose permanent MAC address matches an address in the list. Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).
    mtu
    uint32
    0
| If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    s390-subchannels
    array of string
    []
| Identifies specific subchannels that this network device uses for communcation with z/VM or s390 host. Like the 'mac-address' property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels. The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.
    s390-nettype
    string
| s390 network device type; one of 'qeth', 'lcs', or 'ctc', representing the different types of virtual network devices available on s390 systems.
    s390-options
    dict of (string::string)
    [ ]
| Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include 'portno', 'layer2', 'portname', 'protocol', among others.

Table 21. 802-11-wireless setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    802-11-wireless
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    ssid
    byte array
    []
| SSID of the WiFi network. Must be specified.
    mode
    string
| WiFi network mode; one of 'infrastructure', 'adhoc' or 'ap'. If blank, infrastructure is assumed.
    band
    string
| 802.11 frequency band of the network. One of 'a' for 5GHz 802.11a or 'bg' for 2.4GHz 802.11. This will lock associations to the WiFi network to the specific band, i.e. if 'a' is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible. This setting depends on specific driver capability and may not work with all drivers.
    channel
    uint32
    0
| Wireless channel to use for the WiFi connection. The device will only join (or create for Ad-Hoc networks) a WiFi network on the specified channel. Because channel numbers overlap between bands, this property also requires the 'band' property to be set.
    bssid
    byte array
    []
| If specified, directs the device to only associate with the given access point. This capability is highly driver dependent and not supported by all devices. Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future.
    rate
    uint32
    0
| If non-zero, directs the device to only use the specified bitrate for communication with the access point. Units are in Kb/s, ie 5500 = 5.5 Mbit/s. This property is highly driver dependent and not all devices support setting a static bitrate.
    tx-power
    uint32
    0
| If non-zero, directs the device to use the specified transmit power. Units are dBm. This property is highly driver dependent and not all devices support setting a static transmit power.
    mac-address
    byte array
    []
| If specified, this connection will only apply to the WiFi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    cloned-mac-address
    byte array
    []
| If specified, request that the WiFi device use this MAC address instead of its permanent MAC address. This is known as MAC cloning or spoofing.
    mac-address-blacklist
    array of string
    []
| A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply. Each MAC address should be given in the standard hex-digits-and-colons notation (eg '00:11:22:33:44:55').
    mtu
    uint32
    0
| If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    seen-bssids
    array of string
    []
| A list of BSSIDs (each BSSID formatted as a MAC address like 00:11:22:33:44:55') that have been detected as part of the WiFI network. NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BBSID list of NetworkManager. The changes you make to this property will not be preserved.
    security
    string
| If the wireless connection has any security restrictions, like 802.1x, WEP, or WPA, set this property to '802-11-wireless-security' and ensure the connection contains a valid 802-11-wireless-security setting.
    hidden
    boolean
    FALSE
| If TRUE, indicates this network is a non-broadcasting network that hides its SSID. In this case various workarounds may take place, such as probe-scanning the SSID for more reliable network discovery. However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution.

Table 22. 802-11-wireless-security setting

Key Name | Value Type | Default Value | Value Description
--- | --- | --- | ---
    name
    string
    802-11-wireless-security
| The setting's name; these names are defined by the specification and cannot be changed after the object has been created. Each setting class has a name, and all objects of that class share the same name.
    key-mgmt
    string
| Key management used for the connection. One of 'none' (WEP), 'ieee8021x' (Dynamic WEP), 'wpa-none' (WPA-PSK Ad-Hoc), 'wpa-psk' (infrastructure WPA-PSK), or 'wpa-eap' (WPA-Enterprise). This property must be set for any WiFi connection that uses security.
    wep-tx-keyidx
    uint32
    0
| When static WEP is used (ie, key-mgmt = 'none') and a non-default WEP key index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.
    auth-alg
    string
| When WEP is used (ie, key-mgmt = 'none' or 'ieee8021x') indicate the 802.11 authentication algorithm required by the AP here. One of 'open' for Open System, 'shared' for Shared Key, or 'leap' for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap') the 'leap-username' and 'leap-password' properties must be specified.
    proto
    array of string
    []
| List of strings specifying the allowed WPA protocol versions to use. Each element may be one 'wpa' (allow WPA) or 'rsn' (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed.
    pairwise
    array of string
    []
| A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of 'wep40', 'wep104', 'tkip' or 'ccmp'.
    group
    array of string
    []
| A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of 'wep40', 'wep104', 'tkip', or 'ccmp'.
    leap-username
    string
| The login username for legacy LEAP connections (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap').
    wep-key0
    string
| Index 0 WEP key. This is the WEP key used in most networks. See the 'wep-key-type' property for a description of how this key is interpreted.
    wep-key1
    string
| Index 1 WEP key. This WEP index is not used by most networks. See the 'wep-key-type' property for a description of how this key is interpreted.
    wep-key2
    string
| Index 2 WEP key. This WEP index is not used by most networks. See the 'wep-key-type' property for a description of how this key is interpreted.
    wep-key3
    string
| Index 3 WEP key. This WEP index is not used by most networks. See the 'wep-key-type' property for a description of how this key is interpreted.
    wep-key-flags
    uint32
    0
| Flags indicating how to handle the WEP keys. (see the section called “Secret flag types” for flag values)
    wep-key-type
    uint32
    0
| Controls the interpretation of WEP keys. Allowed values are 1 (interpret WEP keys as hexadecimal or ASCII keys) or 2 (interpret WEP keys as WEP Passphrases). If set to 1 and the keys are hexadecimal, they must be either 10 or 26 characters in length. If set to 1 and the keys are ASCII keys, they must be either 5 or 13 characters in length. If set to 2, the passphrase is hashed using the de-facto MD5 method to derive the actual WEP key.
    psk
    string
| Pre-Shared-Key for WPA networks. If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the WiFi network.
    psk-flags
    uint32
    0
| Flags indicating how to handle the WPA PSK key. (see the section called “Secret flag types” for flag values)
    leap-password
    string
| The login password for legacy LEAP connections (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap').
    leap-password-flags
    uint32
    0
| Flags indicating how to handle the LEAP password. (see the section called “Secret flag types” for flag values)